Haier BC100GS User Manual

To adjust the temperature settings, locate the thermostat control dial inside the refrigerator. Turn the dial to the desired setting, with higher numbers indicating cooler temperatures. Allow 24 hours for the temperature to stabilize.
Ensure the refrigerator is plugged in and the thermostat is set correctly. Check for any obstructions blocking the air vents. Verify that the door seals are clean and intact. If the issue persists, consult the user manual or contact Haier support.
The Haier BC100GS is a manual defrost model. Defrost the unit when frost build-up reaches 1/4 inch thickness or as needed to maintain efficient operation.
To clean the interior, unplug the refrigerator and remove all food items. Use a mixture of mild detergent and warm water to wipe down surfaces. Rinse with clean water and dry thoroughly before plugging the refrigerator back in.
Keep the refrigerator in a well-ventilated area away from heat sources. Ensure there is adequate space around the unit for air circulation. Regularly clean the condenser coils and check door seals for any damage.
It is not recommended to use an extension cord with your Haier BC100GS. Plug the unit directly into a wall outlet to ensure proper electrical supply and safety.
Check if the drain pan is properly placed and not overflowing. Inspect the door seals and ensure they are clean and sealing properly. If leaking persists, contact Haier customer service for further assistance.
Unplug the refrigerator and locate the light cover inside. Remove the cover and unscrew the old bulb. Replace it with a new bulb of the same type and wattage. Reattach the cover and plug the unit back in.
Unusual noises can result from the refrigerator not being level, items inside touching the walls, or the compressor operating. Ensure the unit is level and that there is enough space between stored items and the refrigerator walls.
Use adjustable shelves to accommodate taller items and stackable containers to keep the space organized. Store frequently used items at the front for easy access and ensure proper airflow by not overloading the shelves.