Goodmans B&M Bluetooth 335232 User Manual
![Goodmans B&M Bluetooth Turntable Player 335232 manual cover](/images/d3dd1fb5c23672f549421e32/thumbs/thumb175x175.webp)
To connect the turntable to a Bluetooth speaker, first ensure the speaker is in pairing mode. Then, turn on the turntable and press the Bluetooth button until the LED indicator starts flashing. Once the connection is established, the LED will remain lit.
Check the power connection to ensure the turntable is plugged in properly. Verify that the power outlet is functioning by testing it with another device. If the problem persists, consult the user manual for further troubleshooting steps or contact customer support.
To replace the stylus, gently lift the tonearm and locate the stylus assembly. Carefully remove the old stylus by pulling it out of the cartridge. Insert the new stylus by aligning it with the cartridge and pushing it in until it clicks into place.
Poor audio quality can be due to a dirty stylus or records. Clean the stylus and records with appropriate cleaning tools. Ensure the turntable is on a stable surface to avoid vibrations. Check that the Bluetooth connection is strong if using wireless playback.
Regular maintenance includes cleaning the stylus with a stylus brush, dusting the turntable surface, and ensuring that records are stored properly to avoid warping. It is also good practice to periodically check the belt drive for wear and replace it if necessary.
To switch from Bluetooth to wired mode, disconnect the Bluetooth connection by turning off the Bluetooth function or unpairing the device. Connect the turntable to your audio system using the RCA outputs on the back of the turntable.
Ensure both the turntable and the Bluetooth speaker are within range and free from obstacles. Check for interference from other devices and try restarting both the turntable and the speaker. Updating the firmware of the speaker may also help.
Unlock the tonearm and move it to the side. Adjust the counterweight at the back of the tonearm until the arm is horizontal and balanced. Once balanced, set the tracking force by rotating the counterweight dial to the recommended setting in the user manual.
Ensure the Bluetooth connection is active and the speaker volume is turned up. Check that the turntable is set to Bluetooth mode and that the speaker is selected as the output device. Restart both devices if necessary.
Ensure the turntable is on a level and stable surface to minimize vibrations. Clean records thoroughly before playing to prevent dust-related skips. Check the tracking force and anti-skate settings to ensure they are correctly adjusted.