Ezviz DL01CP Europe User Manual

To install the Ezviz DL01CP Europe Keypad, first ensure the mounting surface is clean and dry. Use the provided screws and anchors to attach the mounting plate to the wall. Then, align the keypad with the mounting plate and secure it in place. Connect the keypad to the smart lock system according to the user manual.
If the keypad is not responding, check if the batteries are installed correctly and replace them if necessary. Ensure there are no obstructions blocking the keypad and that it is within range of the lock. If the issue persists, perform a reset of the keypad and reconfigure it with the lock.
To reset the keypad, remove the battery cover and locate the reset button. Press and hold the button for 5 seconds until the keypad beeps. This will restore the keypad to its factory settings, and you will need to reconfigure it with your lock system.
Yes, the Ezviz DL01CP Europe Keypad supports multiple users. You can program unique entry codes for different users through the Ezviz app or the keypad itself, allowing for personalized access control.
To change the entry codes, access the settings via the Ezviz app or directly on the keypad. Follow the instructions to select the code you wish to change and enter the new code. Ensure to test the new code to confirm it is functioning correctly.
Regular maintenance includes checking and replacing the batteries as needed and cleaning the keypad with a soft, damp cloth to remove dirt and debris. Avoid using harsh chemicals that could damage the keypad surface.
To connect the keypad to the Ezviz app, open the app and navigate to the device management section. Select "Add Device" and follow the prompts to pair the keypad using its unique QR code. Once connected, you can manage settings and entry codes from the app.
If you forget your entry code, use the Ezviz app to reset the code. Navigate to the keypad settings in the app and follow the instructions to set a new entry code. Ensure you have app access on a registered device to perform this action.
Yes, the Ezviz DL01CP Europe Keypad is designed for outdoor use and is weatherproof. However, for optimal performance, it is recommended to install it in a sheltered area to protect it from extreme weather conditions.
To update the firmware, open the Ezviz app and check for any available updates in the device settings. If an update is available, follow the prompts to download and install it. Ensure the keypad is powered and within Bluetooth range during the update process.