Canon CN-E30-105mm T2.8 L S v2 Operation Manual
en
ja
zh
1/6 2017.06 CANON INC. Pub No. BT1-B040-A
F.B.
* 6 12 ft
1 3F.B.
2F.B. 2
1. 2.
3T2.8
4
5 F.B.
6 4 5 23
7 F.B. F.B.
CN-E30-105mm T2.8 L S CN-E30-105mm T2.8 L SP (BT1-B040-A)
108-8011 2-16-6 TEL (03) 3740-3305 FAX (03) 3740-3307
Digital Cinema Lens
CN-E30-105mm T2.8L 2 EF S PL SP S
.................................................. 1 ............... 1 ............... 1 .................................................. 1 .......................................... 1 .......................................... 1
SP
1519 ( 19 )
1.
2. S EF
1
2
3
3
F.B.
133 0.8 P.C.D.106.4mm 300
111 0.8 P.C.D.88.8mm 93.5
111 0.8 P.C.D.88.8mm 55
F.B.
/ PLSP
EFS
2
360
F.B.
ENGLISH
2/6 2017.06 CANON INC. Pub No. BT1-B040-A
1.
2.
1.
2.
3.
1.
2.
1. 2.
3. 4. 5.
6.
146-8501 3-30-2
108-8011 2-16-6
mm
SEF
SPPL
133 111 111
0.8 0.8 0.8
P.C.D. 106.4 mm 88.8 mm 88.8 mm
300 93.5 55
EF
(EF T
EF F F
CN-E30-105mm T2.8 L S CN-E30-105mm T2.8 L SP EF PL 30 105 mm T T2.8f=30 105 11
Super 35mm x 1.781
27.5 mm 24.0 x 13.5 mm
43.6 25.4 13.0 7.4
EOS C300 x 1.781
28.2 mm 24.6 x 13.8 mm
44.6 25.9 13.4 7.5
EOS C500 x 1.91
29.6 mm 26.2 x 13.8 mm
47.2 25.9 14.2 7.5
M.O.D. 0.6 m
M.O.D.
x
Super 35mm 32.3 x 18.2 cm 9.3 x 5.2 cm
EOS C300 33.1 x 18.6 cm 9.6 x 5.4 cm
EOS C500 35.3 x 18.6 cm 10.2 x 5.4 cm
300 93.5 0.8 114 mm 218 mm 210 mm 2.2 kg 15 19 Super 35mm APS-C 35mm
APS-H
3/6 2017.06 CANON INC. Pub No. BT1-B040-A
F.B. (Back Focus) Adjustment
F.B. (back focus) of this lens can be adjusted in the following procedures. Before starting, select an object with sharp contrast at a distance* that facilitates the adjustment work. * Recommended object distance range: 6 to 12 ft.
1 Remove three screws and remove the F.B. adjuster cover.
Note Be sure to keep the screws for later reattachment.
2 Mount the lens on the camera and turn two F.B. adjuster screws counterclockwise one revolution.
Note 1. Be sure to securely mount the lens on the camera mount. 2. Be sure not to remove the screws.
3 Turn the iris ring to set the iris to fully open (T2.8).
4 Turn the zoom ring to set the lens to the telephoto end, then turn the focus ring to bring the object into focus.
5 Turn the zoom ring to set the lens to the wide angle end, then turn the F.B. adjuster to bring the object into focus.
Note Be sure not to move the focus ring at this time.
6 Repeat steps 4 and 5 two or three times.
7 Secure the F.B. adjuster and reattach the F.B. adjuster cover following the reverse procedure.
OPERATION MANUAL (BT1-B040-A)
Digital Cinema Lens CN-E30-105mm T2.8 L S CN-E30-105mm T2.8 L SP
Read "GENERAL SAFETY INFORMATION" (back side) before using the product. The safety cautions must be observed.
Read operation manual (this sheet) before using the product. Keep the manual in place for future reference.
* The shape of the rear lens cap for the SP type differs from the figure above.
Product Configuration
Two types of the CN-E30-105mm T2.8 L are available for the positive lock mount (SP type) and the Canon EF mount (S type). Figures in this manual are for the S type lens unless otherwise mentioned.
Lens body ......................................................................1 Zoom/focus lever (short)................................................1 Zoom/focus lever (long) .................................................1 Attachment holder .........................................................1 Lens cap ........................................................................1 Rear lens cap ................................................................1 Operation Manual Reference Guide
Contact us. Please contact us if you have questions on the products.
Names of Parts
For purchasing other accessories than shown above, please contact your dealer or below.
F.B. adjuster cover
Screws x 3
Available accessories
A variety of professional camera accessories are available using 15 mm and 19 mm rod adaptors. (When using a 19 rod, attach the supplied attachment holder to the lens holder.)
Note 1. Be sure to use the lens holder when mounting the lens on a camera. Be sure to avoid applying
excessive weight to the lens mount when the lens is mounted on a lens support. 2. Mount the S type (EF mount) lens to the camera by following the steps below.
1 Attach the lens to the camera tightly so that both mounting surfaces are in complete contact.
Refer to the operation manual for the respective camera for the detailed information.
2 Secure the lens holder on the lens support using the clamping screw supplied with the lens support.
3 Push the lens toward the camera until both mounting surfaces are in complete contact and clamp the lens support to the rods.
Lens support
AMERICAS CANADA Canon Canada, Inc. http://www.canon.ca/pro Professional Product Support/ le soutien des produits professionnels
(800) 667-2666
MEXICO Canon Mexicana,S.de R.L.de C.V http://www.canon.com.mx
+52 55 5249 4905
USA Canon U.S.A., Inc. http://pro.usa.canon.com http://pro.usa.canon.com/support
(855) CINE-EOS (855-246-3367) (USA Only)
ASIA ASIA & HONG KONG, S.A.R. Canon Hongkong Co., Ltd. http://www.canon.com.hk 19/F, The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
+852 3191 2333, +852 2428 3963
CHINA 89 15 100005 +86(0)10-8513-9999 +86(0)10-8513-9128
KOREA
http://www.canon-ci.co.kr 607 (,5) : +82(0)2-1588-8133
SOUTH & SOUTHEAST ASIA Canon Singapore Pte. Ltd. http://www.canon.com.sg BCTV http://www.canon.com/bctv 1 Fusionopolis Place, #15-10, Galaxis, Singapore 138522
(65) 6799 8888, (65) 6799 8882
JAPAN http://canon.jp 108-8011 2-16-6
EUROPE, MIDDLE EAST, AFRICA Canon Europe Ltd. http://www.canon-europe.com 3 The Square, Stockley Park Uxbridge Middlesex United Kingdom UB11 1ET
Canon Europa N.V. Bovenkerkerweg 59, 1185 XB Amstelveen The Netherlands
OCEANIA AUSTRALIA Canon Australia Pty. Ltd. www.canon.com.au
13-13-83 (within Australia only)
(61) 02-9805-2555
NEW ZEALAND Canon New Zealand Ltd. www.canon.co.nz
0800-222-666 (within New Zealand only)
(64) 09-489-0300
Lens cap
Reference Guide
Operation ManualLens body
Zoom/focus lever (short)
Zoom/focus lever (long) Rear lens cap*
Attachment holder
Focus drive gear Number of teeth: 133 Module: 0.8 metric module P.C.D.: 106.4 mm Angular rotation: 300
Zoom drive gear Number of teeth: 111 Module: 0.8 metric module P.C.D.: 88.8 mm Angular rotation: 93.5
Iris drive gear Number of teeth: 111 Module: 0.8 metric module P.C.D.: 88.8 mm Angular rotation: 55
Lens holder
Attachment holder
F.B. adjuster cover
EF mount (S type)
Zoom/focus levers PL mount (SP type)
Screws x 2
360
F.B. adjuster
Use the index mark and adjuster scale.
4/6 2017.06 CANON INC. Pub No. BT1-B040-A
GENERAL SAFETY INFORMATION
The safety warnings and cautions provided on the product or in this operation manual must be observed. Failure to observe these warnings and cautions may result in injury or accident.Read this operation manual carefully to familiarize yourself with its contents and ensure that you can operate the product properly. Also, store this manual in a safe place where it can easily be referenced whenever necessary.
This operation manual uses the following symbols and terms to identify hazards in order to prevent accidents.
WARNING This indicates a potentially hazardous situation which, if not heeded, may result in death or serious injury to you or others. Be sure to heed all warning notices to ensure safe operation at all times.
CAUTION This indicates a potentially hazardous situation which, if not heeded, may result in a minor injury to you or others, or damage to property.
NOTE This indicates cautions and recommendations for operation. It contains information which, if not heeded, may result in this product failing to function properly. These no- tices also contain useful information for operation.
HANDLING THE PRODUCT WARNING
1. Do not stare at the sun or other bright objects through the lens. It may injure your eyes.
CAUTION 1. Ensure that all mountings are securely tightened. If a mounting becomes loose, parts may fall off and cause
injury. 2. Inspect mountings regularly (about every six months to one year) to ensure they are securely tightened. If a
mounting becomes loose, parts may fall off and cause injury. NOTE
1. Do not expose the lens to strong impact. Striking or dropping the lens may cause the malfunction of the product. 2. This product is not waterproof. Take measures to avoid direct contact with rain, snow, or moisture. Otherwise it
may cause the malfuction of the product. 3. Take measures to avoid sudden changes in temperature where the lens is used, which may prevent operation
temporarily if condensation forms in the lens.
DEALING WITH ABNORMALITIES WARNING If any of the following situations occurs, immediately dismount the lens from the camera and contact Canons representative or the dealer listed below. Smoke, fumes, or unusual noises Entry of foreign objects (such as liquid or metal objects) inside the product
MAINTENANCE AND INSPECTION NOTE
1. Clean off any dust on the lens surface using a lens blower or a soft lens brush. In case of getting fingerprints or stains on the lens, use a clean cotton cloth moistened with commercial lens cleaning fluid, or use lens cleaning paper. Gently wipe in a spiral pattern from the center of the lens. Be careful not to rub dust across the lens, which may scratch the lens surface.
2. Routine inspection about once a year is recommended, depending on the conditions and environment of use. Request overhaul, if needed.
STORAGE CAUTION Always attach the lens cap, hood cap, dust cap or covers before storage. Storing the lens without the caps or covers attached poses a risk of fire if the lens concentrate light in direct sunlight.
NOTE Immediately wipe off any moisture on the lens from misty or foggy environments, using a dry cloth. Seal the lens in a plastic bag with a desiccant (preferably new) to prevent moisture inside. Otherwise it may cause the mold or the malfunction of the product.
TO THE CUSTOMER 1. Canon shall bear no responsibility for damage resulting from improper operation of this product by the customer. 2. Canon shall make no guarantees about the product quality, functions, or operation manual and its marketability
and suitability for the customers purpose. Moreover, Canon shall bear no responsibility for any damage, direct or incidental, that results from usage for the customers purpose.
3. Canon shall make no guarantees about the results obtained using this product. 4. The product specifications, configuration, and appearance are subject to change without prior notice. 5. For further information on repairs, maintenance, or adjustments not mentioned in this operation manual, contact
your Canon dealer or your Canon sales representative. 6. Note that Canon may be unable to undertake servicing or repair of a product if it is modified without consulting
Canon or your Canon sales representative.
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
Canon Europe Ltd 3 The Square, Stockley Park, Uxbridge,Middlesex, UB11 1ET UK
All rights reserved. No part of this operation manual may be reproduced or copied in any from or by any means without the written permission of Canon Inc.
Dimensions of parts Unit: mm
S type (EF mount)
SP type (PL mount)
Spur gear specifications
Focus drive gear Zoom drive gear Iris drive gear
Number of teeth 133 111 111
Module 0.8 metric module 0.8 metric module 0.8 metric module
P.C.D. 106.4 mm 88.8 mm 88.8 mm
Angular rotation 300 degrees 93.5 degrees 55 degrees
Specifications
Only for European Union and EEA (Norway, Iceland, and Liechtenstein)
This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/EU) and national legislation. This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please
contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service. For more information regarding return and recycling of WEEE products, please visit www.canon-europe.com/weee.
Canadian Radio Interference Regulations CAN ICES-3(B)/NMB-3(B)
FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.
For CN-E30-105mm T2.8 L S only
CN-E30-105mm T2.8 L S CN-E30-105mm T2.8 L SP Lens Mount Canon EF PL Focal Length 30 to 105 mm Maximum T-stop T2.8 (f = 30 to 105) Iris Blades 11 pieces
Coverage Super 35mm Image Circle / H x V (1.78:1)
27.5 mm / 24.0 x 13.5 mm
Angular Field of View (H / V) at wide angle end 43.6 / 25.4 degrees
Angular Field of View (H / V) at telephoto end 13.0 / 7.4 degrees
Coverage EOS C300 Image Circle / H x V (1.78:1)
28.2 mm / 24.6 x 13.8 mm
Angular Field of View (H / V) at wide angle end 44.6 / 25.9 degrees
Angular Field of View (H / V) at telephoto end 13.4 / 7.5 degrees
Coverage EOS C500 Image Circle / H x V (1.9:1)
29.6 mm / 26.2 x 13.8 mm
Angular Field of View (H / V) at wide angle end 47.2 / 25.9 degrees
Angular Field of View (H / V) at telephoto end 14.2 / 7.5 degrees
Minimum Object Distance (M.O.D.) 0.6 m / (from the image sensor)
Object Dimensions at M.O.D.
Super 35mm 32.3 x 18.2 cm at wide angle end 9.3 x 5.2 cm at telephoto end
EOS C300 33.1 x 18.6 cm at wide angle end 9.6 x 5.4 cm at telephoto end
EOS C500 35.3 x 18.6 cm at wide angle end 10.2 x 5.4 cm at telephoto end
Focus Angular Rotation 300 degrees Zoom Angular Rotation 93.5 degrees Spur Gear Module 0.8 metric module Front Diameter 114 mm Length 218 mm 210 mm Weight 2.2 kg * A variety of professional camera accessories compatible with the 15 mm and 19 mm rod system can be
used with this lens. * This lens is compatible with EOS cameras that have a Super 35mm or equivalent sensor, or an APS-C image
sensor. The lens is not compatible with cameras that have a 35-mm full-size sensor or an APS-H sensor.
Reference Information This lens is a full manual lens for shooting movies. This lens is developed primarily for movie production, and have a color balance typical for movies. This means that the
color reproduction is warmer than that of EF lenses which are basically used to shoot still images. Therefore, when using both types of lens together, adjust the color balance (redo the white balance etc.) as necessary.
In general, the depth of field becomes shallow and the focusing range becomes extremely narrow near the widest aperture and when shooting a subject at close range. In addition, this tendency increases for lenses with longer focal lengths. When shooting images, carefully check the focusing condition using the zoom mode of the finder or other means, and shoot a sufficient number of test images before performing focus operations.
(for EF mount Lens only) The T-numbers of this lens are indicated on the iris ring of the lens. On the other hand, the iris information from this lens to
the camera uses the F-number in consideration of use together with conventional EF lenses. Therefore, the camera side displays a different value (F-number) from the indication on the iris ring of the lens.
Information of the focal length displayed on the camera side omits the figures below the decimal point.
For CN-E30-105mm T2.8 L S only
For CN-E30-105mm T2.8 L S only
5/6 2017.06 CANON INC. Pub No. BT1-B040-A
F.B.
* * 6 12
1 3
2
1.
2.
3 T2.8
4
5
6 4 - 5
7
89 15 100005 +86(0)10-8513-9999 +86(0)10-8513-9128
, , ( ) ,
CN-E30-105mm T2.8 L S CN-E30-105mm T2.8 L SP
:2017.6.1 :
(BT1-B040-A)
CN-E30-105mm T2.8 LPLSPEF SS
.....................................................1 / ......................................1 / .......................................1 .....................................................1 .........................................................1 .....................................................1
SP
/
/ *
x 3
1519
19
1.
2. SEF
1
2
3
133 0.8 P.C.D. 106.4 mm 300
111 0.8 P.C.D. 88.8 mm 93.5
111 0.8 P.C.D. 88.8 mm 55
/
EFS
PLSP
360
x 2
6/6 2017.06 CANON INC. Pub No. BT1-B040-A
1.
1.
2.
1.
2.
3.
()
1.
2.
()
( )
1. 2. ()
3. 4.
5.
89 15 100005 +86(0)10-8513-9999 +86(0)10-8513-9128
::2017.6.1
mm
SEF
SPPL
133 111 111 0.8 0.8 0.8
P.C.D. 106.4 mm 88.8 mm 88.8 mm 300 93.5 55
Pb Hg Cd
Cr(VI)
PBB
PBDE
SJ/T 11364
GB/T 26572
GB/T 26572
FOR P.R.C. ONLY
CN-E30-105mm T2.8 L S CN-E30-105mm T2.8 L SP EF PL 30 105 mm T2.8 (f = 30 105) 11
Super 35mm / H V (1.78:1)
27.5 mm / 24.0 13.5 mm
(H / V) 43.6 / 25.4 (H / V) 13.0 / 7.4
EOS C300 / H V (1.78:1)
28.2 mm / 24.6 13.8 mm
(H / V) 44.6 / 25.9 (H / V) 13.4 / 7.5
EOS C500 / H V (1.9:1)
29.6 mm / 26.2 13.8 mm
(H / V) 47.2 / 25.9 (H / V) 14.2 / 7.5
0.6 m /
Super 35mm : 32.3 18.2 cm : 9.3 5.2 cm
EOS C300 : 33.1 18.6 cm : 9.6 5.4 cm
EOS C500 : 35.3 18.6 cm : 10.2 5.4 cm
300 93.5 0.8
114 mm 218 mm 210 mm 2.2 kg * 15 mm19 mm
* Super 35mmAPS-CEOS
35-mmAPS-H
EF
(EF)
T