Brother P-touch PT-M95 Quick Setup Guide
![Brother P-touch PT-M95 manual cover](/images/vmvAnBXgufWsXbHfDxGDXFnA/thumbs/thumb175x175.webp)
To change the tape cassette, open the cassette compartment cover by pressing the indicated area. Remove the old cassette and insert a new one, ensuring the tape and ink ribbon are taut across the mouth of the cassette and that it clicks into place.
Check if the batteries are inserted correctly and ensure they have sufficient charge. If using an AC adapter, verify that it is properly connected. If the problem persists, try replacing the batteries or using a different adapter.
To clean the print head, turn off the labeler and open the cassette compartment. Use a cotton swab slightly moistened with isopropyl alcohol to gently wipe the print head. Allow it to dry completely before closing the cover and turning the labeler back on.
To reset the PT-M95, turn off the labeler. Hold down the 'Shift' and 'R' keys while turning the labeler back on. Release the keys when the labeler powers up, and it will be reset to factory settings.
Blank spaces or missing characters may be due to a dirty print head or a problem with the tape cassette. Clean the print head and check that the tape cassette is properly installed with no slack. Replace the cassette if necessary.
Yes, the Brother P-touch PT-M95 supports multiple tape widths. Ensure you are using compatible M-tapes, which come in widths of 9mm and 12mm, for optimal performance.
To adjust text size, press the 'Size' key on the labeler until you reach your desired font size. The PT-M95 offers various sizes to fit your labeling needs.
Ensure the tape cassette is installed correctly and that the tape is not twisted or caught. Remove the cassette, straighten the tape, and reinsert it. Clean the tape path if necessary.
The PT-M95 does not have a memory function for saving label designs. You will need to manually re-enter designs each time you want to print them.
Ensure you are using genuine Brother M-tapes, as they are designed for optimal adhesion. If the issue persists, try cleaning the surface where the label will be applied and ensure it is dry before application.