Aiwa AWA650US Quick Start Guide
![Aiwa AWA650US TV manual cover](/images/fmURDDRrgujoyQoGmIEUObiV/thumbs/thumb175x175.webp)
To connect your Aiwa AWA650US TV to Wi-Fi, go to the 'Settings' menu, select 'Network', and then choose 'Wireless'. Scan for available networks, select your Wi-Fi network, and enter the password.
If the screen is blank, ensure that the TV is powered on and the correct input source is selected. Check all cable connections and try resetting the TV by unplugging it for a few minutes.
To update the firmware, navigate to 'Settings', select 'Support', and then 'Software Update'. Choose 'Update Now' to check for and install available updates.
Check if the TV is muted or the volume is too low. Ensure external audio devices are properly connected. Also, verify audio settings in the TV's menu and try a different input source.
To enable parental controls, go to 'Settings', select 'Parental Controls', and set up a PIN. You can block specific channels or restrict content based on ratings.
First, replace the remote's batteries. If it still doesn't work, ensure there are no obstructions between the remote and TV, and try resetting the remote by removing the batteries and pressing all buttons.
To perform a factory reset, go to 'Settings', select 'General', and then choose 'Reset'. Confirm your choice to reset the TV to its original settings.
Ensure the power cord is securely connected and the outlet is functional. Try using a different power outlet and inspect the power button on the TV and remote control.
To adjust picture settings, press the 'Menu' button on your remote, navigate to 'Picture', and customize settings such as brightness, contrast, and color to your preference.
To improve streaming quality, ensure a stable internet connection by minimizing interference and placing the router closer to the TV. You can also reduce the number of devices using the network simultaneously.