Aiwa ABS-19B User Manual
![Aiwa ABS-19B Speaker manual cover](/images/hwTghvDYlSqryLBYrewGOAwf/thumbs/thumb175x175.webp)
To pair your Aiwa ABS-19B Speaker, turn on the speaker and activate pairing mode by pressing the Bluetooth button until the LED indicator starts flashing. On your Bluetooth device, search for available devices and select "Aiwa ABS-19B" to connect.
Ensure that the speaker is charged by connecting it to a power source using the supplied charging cable. If it still doesn't turn on, try resetting the speaker by pressing and holding the power button for 10 seconds.
To reset your Aiwa ABS-19B Speaker, press and hold the power button and the volume up button simultaneously for about 10 seconds until the speaker powers off and back on.
Check the volume level on both the speaker and the connected device. Ensure that the speaker is not muted. Also, verify that the audio source is playing and not paused.
Use a soft, dry cloth to gently wipe the exterior surfaces of the speaker. Avoid using any harsh chemicals or abrasive materials. Ensure that no moisture enters the speaker's openings.
Yes, you can use your Aiwa ABS-19B Speaker while it is charging. However, for optimal battery health, it is recommended to fully charge the speaker before use.
The maximum Bluetooth range for the Aiwa ABS-19B Speaker is approximately 33 feet (10 meters) in an open area without obstructions.
It takes approximately 3 to 4 hours to fully charge the Aiwa ABS-19B Speaker using the supplied charging cable and a compatible USB power adapter.
The Aiwa ABS-19B Speaker can only maintain one active Bluetooth connection at a time. To switch devices, disconnect the current device and connect the new one.
Ensure that the speaker is within the Bluetooth range and that there are no physical obstructions. Interference from other wireless devices can also affect the connection. Try turning off other Bluetooth devices or moving to a different location.