AGA Premium Series Installation Guide
![AGA Premium Series Refrigerator manual cover](/images/lghGVdlCRTjEKlKNAnvuZTwj/thumbs/thumb175x175.webp)
To change the water filter, locate the filter compartment inside the refrigerator. Turn the filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it locks into place. Run water through the dispenser for 5 minutes to clear any air and contaminants.
Check if the refrigerator is plugged in and the temperature setting is correct. Ensure the doors are fully closed and the seals are not damaged. Clean the condenser coils at the back to improve efficiency. If the problem persists, contact a professional.
To clean the interior, unplug the refrigerator and remove all food items. Use a mixture of warm water and mild detergent to wipe down the surfaces. Avoid using abrasive cleaners. Rinse with clean water and dry with a soft cloth before restocking.
For optimal performance, set the refrigerator compartment to 37°F (3°C) and the freezer compartment to 0°F (-18°C). Adjust the settings if necessary based on food storage needs and external temperature conditions.
To reset the ice maker, locate the on/off switch or button on the ice maker unit. Turn it off for a few minutes, then turn it back on. If there's a reset button, press it and hold for 10 seconds. Check if the ice maker resumes normal operation.
Frost build-up can occur due to frequent door openings or faulty door seals. Check the seals for any gaps or damage. Avoid keeping the door open for extended periods. Defrost the freezer manually if the frost accumulation is excessive.
Unusual noises may result from the compressor, fan, or defrost timer. Ensure the refrigerator is level and not in contact with any walls or cabinets. Clean the condenser fan and check for any obstructions. If noise persists, consult a technician.
Regularly clean the condenser coils, check and replace door seals if needed, and replace the water filter every six months. Ensure proper airflow around the refrigerator and check the temperature settings periodically.
To activate holiday mode, press the "Settings" button on the control panel, then select the "Holiday Mode" option. This mode minimizes energy consumption while keeping the refrigerator functional. Follow the same steps to deactivate.
Inspect the door seals for any signs of wear or obstructions. Ensure the refrigerator is level and adjust the door hinges if necessary. Rearrange items inside the refrigerator to prevent them from blocking the door closure.