AGA Total Control TC3 Hotcupboard Installation Guide
![AGA Total Control TC3 Hotcupboard Cooker manual cover](/images/ZuDAhNIPfabahRjTdJOgRBwV/thumbs/thumb175x175.webp)
To preheat the AGA Total Control TC3 Hotcupboard Cooker, ensure all control knobs are in the correct position and switch the desired oven or hotplate on at least 30 minutes before cooking. This allows the appliance to reach the optimal temperature for even cooking.
First, check the power supply to ensure the cooker is plugged in and switched on. Verify that the circuit breaker has not tripped. If the issue persists, consult the user manual for troubleshooting steps or contact a qualified technician.
Allow the hotplates to cool completely. Use a damp cloth with mild detergent to wipe away spills. Avoid using abrasive cleaners or scouring pads as they may damage the surface.
Regularly clean the exterior and interior surfaces. Check the seals on the oven doors for wear and replace if necessary. An annual professional inspection is recommended to ensure optimal performance and safety.
Utilize the programmable timer to switch off the cooker when not in use. Only preheat the oven when necessary and cook multiple dishes at once to maximize energy use.
The AGA Total Control TC3 requires an electrical power supply to operate. During a power outage, the cooker will not function. Consider alternative cooking methods until power is restored.
Plan your cooking by using different ovens for different temperature requirements. Utilize the hotcupboard for slow cooking or warming dishes. This allows for efficient use of the cooker’s capabilities.
Temperature settings are adjusted using the control panel. Refer to the user guide for specific instructions on setting the desired temperatures for each oven and hotplate.
Ensure the cooker is clean and free from food debris. Check if the smell is due to a new appliance burning off protective coatings; this should dissipate after initial use. If the smell persists, consult a technician.
Use suitable cookware and line baking trays with parchment paper. Regularly clean the oven to prevent build-up. Applying a light coating of vegetable oil to surfaces can also help prevent sticking.