West Bend L5223 56624 Instruction Manual
![West Bend L5223 56624 Coffee Maker manual cover](/images/TMyeUznSWNqdGgxBkHwryVcL/thumbs/thumb175x175.webp)
To clean the coffee maker, mix equal parts of water and white vinegar and run a brewing cycle. Then, run two cycles with fresh water to rinse.
Ensure the coffee maker is plugged in and the power switch is turned on. Check the water reservoir for enough water and ensure the filter basket is correctly placed.
Regularly clean the coffee maker, use fresh filtered water, and ensure you are using the correct coffee-to-water ratio.
Check if the water reservoir is overfilled or if there is any blockage in the coffee maker's internal pathways. Ensure the carafe is properly positioned.
Yes, you can use pre-ground coffee. Measure the coffee according to your taste preference, typically one tablespoon per cup.
To descale, fill the water reservoir with a descaling solution or a mixture of vinegar and water, then run a brew cycle. Rinse with two cycles of fresh water.
You can use standard basket-style paper filters or a reusable mesh filter that fits the basket size of the coffee maker.
Refer to the user manual for specific instructions, but typically, you would press the 'Set' button and use the hour and minute buttons to set the desired brew time.
Ensure the coffee maker is cleaned and dried before storing. Keep it in a dry place away from direct sunlight and excessive heat.
Unplug the coffee maker, wait for a minute, and then plug it back in. Set the clock and timer settings again, if needed.