Toro Super Recycler 21386 Quick Start Guide

Ensure the fuel tank is filled and the oil level is correct. Pull the starter handle slowly until you feel resistance, then pull rapidly to start the engine.
Check the fuel level and oil. Ensure the spark plug is connected and in good condition. Clean the air filter if it's dirty.
Locate the height adjustment levers on each wheel. Move the levers to the desired position, ensuring all wheels are set to the same height for an even cut.
After ensuring the mower is off and cool, tilt it to the side. Use a hose to remove grass clippings and debris, and a brush for stubborn buildup.
Change the oil after the first 5 hours of use, then every 25 hours or at the start of each mowing season.
Excessive vibration could be due to a damaged blade, loose parts, or debris caught in the mower. Check for any visible issues and tighten loose components.
Disconnect the spark plug wire, remove the old spark plug using a socket wrench, and install the new plug by hand before tightening with the wrench.
Drain fuel, change the oil, clean the mower thoroughly, and store it in a dry place. Check and replace any worn parts as needed.
Remove the blade and use a file or sharpening stone to sharpen the cutting edges. Balance the blade before reinstalling it to avoid uneven mowing.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using fuel with more than 10% ethanol.