Sony DVP-SR500H Reference Guide
![Sony DVP-SR500H manual cover](/images/3e106d3a1958d1cfb28fb1d0/thumbs/thumb175x175.webp)
To connect the Sony DVP-SR500H to your TV, use an HDMI cable for the best quality. Connect one end of the HDMI cable to the HDMI OUT port on the DVD player and the other end to the HDMI IN port on your TV.
Ensure the DVD is compatible with the player and is clean and free from scratches. Also, check if the disc is inserted correctly and the region code matches your player.
The Sony DVP-SR500H does not support firmware updates. Ensure your player is functioning with the latest features by keeping it connected to compatible devices.
Check the audio connections and ensure cables are firmly connected. Verify that the TV is set to the correct input and the volume is turned up. Also, check the audio settings on the DVD player.
To perform a factory reset, turn on the player without a disc inside, press the STOP button on the remote, then press HOME, and navigate to Setup > Resetting > Reset to Factory Default Settings.
The Sony DVP-SR500H does not support USB media playback. It is designed primarily for DVD playback with HDMI upscaling.
The Sony DVP-SR500H supports DVD, DVD-R/RW, DVD+R/RW, CD, and CD-R/RW discs. It may not support certain discs due to recording conditions.
Ensure you are using an HDMI connection for the best quality. Adjust the picture settings on your TV, and use the DVD player's setup menu to optimize output settings like upscaling.
This could be due to a faulty disc, an issue with the disc tray, or a malfunction in the player. Ensure discs are clean and try resetting the player to factory settings.
To clean the lens, use a lens cleaning disc available at electronics stores. Avoid opening the unit to clean manually as it may void the warranty.