Simrad ECDIS Novico E50 Installation Guide

Simrad ECDIS Novico E50 Navigator manual cover
Pages 47
Year 2016
Language(s)
English en

Simrad ECDIS Novico E50 Navigator Specification

The Simrad ECDIS Novico E50 Navigator is a sophisticated Electronic Chart Display and Information System designed to enhance maritime navigation safety and efficiency. It features a high-resolution, 24-inch color display providing clear and precise chart representation, essential for accurate navigation and situational awareness. The system integrates advanced route planning and monitoring capabilities, allowing users to input, modify, and optimize navigational routes with ease. Its intuitive user interface is designed for seamless operation, enabling quick access to critical functionalities and reducing the learning curve for new users.

The E50 Navigator supports a wide range of official electronic navigational charts, including ENC and RNC, ensuring compliance with international maritime regulations. It offers real-time data integration from AIS, GPS, and radar systems, providing comprehensive situational awareness and enhancing collision avoidance capabilities. The system is equipped with redundant power supplies and data storage solutions to ensure continuous operation and data integrity in critical situations.

Furthermore, the E50 Navigator is built with robust hardware capable of withstanding the rigors of marine environments. It features a fanless design for silent operation and minimal maintenance, along with a waterproof and dust-resistant casing to protect against harsh conditions. The system's network capabilities enable seamless integration with other onboard systems, facilitating the sharing of navigational data across multiple platforms.

In terms of compliance, the Simrad ECDIS Novico E50 Navigator meets all relevant IMO and IEC standards, ensuring it fulfills the mandatory requirements for ECDIS installations on SOLAS vessels. Overall, the E50 Navigator is a reliable and comprehensive solution for modern maritime navigation, designed to enhance operational safety, efficiency, and compliance.

Simrad ECDIS Novico E50 Navigator F.A.Q.

How do I update the charts on the Simrad ECDIS Novico E50 Navigator?

To update charts, insert the USB drive with the new chart data into the ECDIS unit. Navigate to the 'Chart Update' menu, select 'Load New Charts,' and follow the on-screen instructions to complete the update process.

What steps should I take if the ECDIS fails to start?

First, check the power supply and ensure all connections are secure. If the problem persists, consult the user manual for troubleshooting tips or contact Simrad support for assistance.

How can I calibrate the touchscreen on the Simrad ECDIS Novico E50 Navigator?

Access the 'Settings' menu and select 'Touchscreen Calibration.' Follow the prompts to touch specific points on the screen to ensure accurate calibration.

What is the procedure for backing up ECDIS data?

Go to the 'Data Management' section in the menu, select 'Backup,' and choose the data types you wish to backup. Save the backup to an external USB drive for safekeeping.

How do I set up alarms on the Simrad ECDIS Novico E50 Navigator?

In the 'Alarms' menu, you can configure various alarm parameters such as depth, speed, and CPA/TCPA settings. Adjust the thresholds and enable alarms as needed.

What should I do if the GPS signal is lost on the ECDIS?

Check the GPS antenna connections and inspect the cable for damage. If necessary, switch to a secondary GPS receiver if available, and verify that the ECDIS is set to use the correct input.

How can I customize the display settings on the ECDIS?

Access the 'Display Settings' menu to adjust brightness, contrast, and color schemes. You can also toggle layers and information overlays to suit your preferences.

What is the recommended maintenance schedule for the Simrad ECDIS Novico E50 Navigator?

Perform a routine check every six months, including software updates, hardware inspection, and cleaning of the display and input devices. Refer to the maintenance manual for detailed guidance.

How do I perform a factory reset on the ECDIS?

To perform a factory reset, access the 'System Settings' menu, select 'Factory Reset,' and confirm your selection. Be aware that this will erase all user data and settings.

Can I integrate AIS data with the ECDIS, and how?

Yes, AIS data can be integrated. Connect the AIS receiver to the ECDIS via an appropriate interface, and configure the input settings under 'Communication Settings' to display AIS targets on the chart.