Samsung WF45M5100AW Quick Start Guide
![Samsung WF45M5100AW Washing Machine manual cover](/images/nowhPUMTpnhCGmKoYeryAIfB/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the washing machine, add detergent in the detergent drawer, select the desired cycle using the control panel, and press the Start/Pause button.
Check if the drain hose is kinked or clogged. Also, inspect the drain filter for debris and clean it if necessary. Ensure the drain hose is installed at the correct height.
Remove the detergent drawer by pressing down on the release lever. Wash each compartment under running water and use a soft brush to clean any residue. Reinsert the drawer once dry.
The maximum load capacity for the Samsung WF45M5100AW is 4.5 cubic feet. Ensure not to overload the washer as it may affect performance.
To perform a self-clean cycle, ensure the drum is empty, then press the Power button and select the Self Clean cycle. Press the Start/Pause button to begin.
Excessive vibration may be due to an unbalanced load. Redistribute clothes evenly in the drum, and make sure the machine is level on the floor.
The Samsung WF45M5100AW does not have a traditional lint filter. Lint is expelled with the wastewater, but it's good practice to clean the drain pump filter every month.
If the door won't open, ensure the cycle has completed and the drum is not filled with water. Check for an error code and refer to the manual. Perform a manual drain if necessary.
Ensure the machine is level and on a stable surface. Consider using vibration pads under the feet and ensure the load is balanced inside the drum.
Regularly clean the detergent drawer, inspect and clean the door seal, run a self-clean cycle monthly, and check the water hoses for leaks or wear.