Samsung WF42H5600AP Quick Start Guide
![Samsung WF42H5600AP Washing Machine manual cover](/images/eUERhxNuIDuWCipKWWHnLROv/thumbs/thumb175x175.webp)
To clean the detergent drawer, first, remove it by pulling it out until it stops. Press the release lever to completely remove the drawer. Rinse it under warm water to remove any detergent residue. Use a soft brush to clean hard-to-reach areas, then dry thoroughly before reinserting.
If your washing machine is not draining, check for clogs in the drain hose and the filter. Ensure the hose is not kinked. Clean the debris filter located at the front bottom of the machine. If the problem persists, consult the user manual or contact Samsung support.
Ensure the washing machine is level by adjusting the front leveling legs. Verify that the load is evenly distributed and not overloaded. Avoid washing single bulky items which can cause imbalance.
Perform regular maintenance by cleaning the detergent drawer, drum, and filter. Run a Self Clean cycle once a month. Inspect hoses for signs of wear and replace if necessary. Keep the door slightly open when not in use to prevent mold and mildew.
To use the Self Clean feature, ensure the drum is empty, then press the Power button. Select the Self Clean cycle and press Start. The process will take approximately 1 hour and 30 minutes.
Unpleasant odors can result from residue buildup. Run a Self Clean cycle to eliminate odors. Ensure regular cleaning of the detergent drawer and door seals. Leaving the door slightly ajar after use can help prevent odors.
Error code 4E indicates a water supply issue. Ensure that the water supply valves are fully open. Check the inlet hoses for kinks or blockages and ensure they are correctly connected to the machine.
It is not recommended to wash waterproof items in this model as it may cause abnormal vibrations or damage. Refer to the user manual for specific garment care instructions.
Check if the washer is properly plugged in and the circuit breaker is not tripped. Try resetting the machine by unplugging it for a few minutes and then plugging it back in. If the issue persists, contact Samsung support.
To save energy, use cold water cycles whenever possible and ensure to wash full loads. Utilize the Eco Wash cycle designed to reduce energy consumption. Regular maintenance will also ensure efficient operation.