Samsung SilverCare WF339AAW Quick Start Guide
![Samsung SilverCare WF339AAW Washing Machine manual cover](/images/wnglhUsEsInUxKXLxveODxKK/thumbs/thumb175x175.webp)
To avoid unbalanced loads, distribute clothes evenly around the drum. Mix large and small items to allow for better tumbling. Avoid overloading the washer.
Check the drain hose for kinks or clogs. Ensure the drain hose is not inserted too far into the drain pipe. Clean the pump filter and check for any blockages in the drain pump.
Remove the detergent drawer by pressing down the release lever. Soak the drawer in warm, soapy water and scrub with a soft brush. Rinse thoroughly and dry before reinserting.
SilverCare technology uses silver ions to sanitize laundry at lower temperatures, which reduces energy consumption while effectively killing bacteria.
Ensure the machine is level by adjusting its feet. Check for unbalanced loads and redistribute clothes if necessary. Verify that transport bolts have been removed if the machine is newly installed.
To perform a self-clean cycle, ensure the drum is empty, select the "Self Clean" cycle on the control panel, and start the machine. Use a washing machine cleaner if desired.
Regularly clean the detergent drawer, filter, and drum. Check hoses for leaks or wear. Perform a self-clean cycle monthly and ensure the machine is level.
Check that the washer is plugged in and the circuit breaker is not tripped. Ensure the door is closed properly. Verify the water supply is turned on.
Refer to the user manual for specific error codes. Common solutions include checking water supply, clearing blockages, or resetting the machine by unplugging it for a few minutes.
Use cold water cycles where possible, take advantage of the SilverCare technology, and wash full loads instead of multiple smaller ones to conserve energy.