Samsung RS267TD Quick Start Guide
![Samsung RS267TD Refrigerator manual cover](/images/ZzFZrMFpHsLujMqITMlSDrQQ/thumbs/thumb175x175.webp)
To reset the filter indicator light, press and hold the "Ice Type" and "Child Lock" buttons simultaneously for 3 seconds. The light should turn off, indicating the reset is complete.
First, ensure that the refrigerator is plugged in and the door is closing properly. Check the temperature settings to ensure they are correctly set. Clean the condenser coils and ensure the vents inside the fridge are not blocked. If the issue persists, consider contacting a professional technician.
Locate the water filter in the refrigerator compartment. Turn the filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it locks into place. Run water through the dispenser for a few minutes to clear any air and impurities.
Water leakage can be caused by a clogged defrost drain, a damaged water filter, or a faulty water inlet valve. Check these components and clean or replace as necessary. If the problem continues, consult a professional technician.
To activate the Power Freeze function, press the "Freezer" button until the display shows "Power Freeze." This function will accelerate the freezing process and is useful when adding large amounts of food to the freezer.
Ensure that the ice maker is turned on and the water supply line is connected. Check for any ice blockages in the ice maker mechanism. If the problem persists, it may require servicing or replacement by a professional.
It is recommended to clean the condenser coils every six months to ensure optimal performance. Use a vacuum cleaner or a brush to remove dust and debris from the coils.
The Samsung RS267TD refrigerator does not offer a reversible door feature. The door swing direction cannot be changed.
The recommended temperature setting for the refrigerator compartment is 37°F (3°C), and for the freezer compartment, it is 0°F (-18°C). Adjust as needed depending on your preference and ambient conditions.
To perform a factory reset, unplug the refrigerator from the power source, wait 5 minutes, and then plug it back in. This will reset the appliance to its default settings.