Samsung RS265TD Quick Start Guide

To reset the filter indicator light, press and hold the "Ice Type" and "Child Lock" buttons simultaneously for about 3 seconds until the light turns off.
Ensure that the refrigerator is plugged in and the doors are closing properly. Check if the temperature settings are correct and that there is no obstruction blocking the vents inside the refrigerator. If the problem persists, consider cleaning the condenser coils or contacting a technician.
Locate the water filter in the upper right corner of the refrigerator compartment. Turn the filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it locks into place. Be sure to flush about 3 gallons of water through the new filter to remove any air and impurities.
Frost buildup can occur if the freezer door is not sealing properly. Check the door gasket for any damage or debris. Additionally, ensure that the freezer is not overfilled, which could prevent the door from closing completely.
The Power Cool and Power Freeze options are used to quickly lower the temperature in the refrigerator and freezer. To activate Power Cool, press the "Fridge" button until "Power Cool" is displayed. For Power Freeze, press the "Freezer" button until "Power Freeze" is displayed.
The recommended temperature setting for the refrigerator is 37°F (3°C) and for the freezer is 0°F (-18°C). These settings ensure optimal food preservation.
To clean the condenser coils, first unplug the refrigerator. Locate the coils, usually found at the back or underneath the unit. Use a vacuum cleaner with a brush attachment to gently remove dust and debris. Clean the coils at least once a year for optimal performance.
Ensure that the ice maker is turned on and that the water supply line is connected and not kinked. Check the ice maker for any ice jams and clear them if necessary. If the problem persists, consider replacing the water filter or contacting a technician.
To activate the Child Lock, press and hold the "Child Lock" button for 3 seconds. This will disable the control panel to prevent accidental changes. To deactivate, press and hold the button again for 3 seconds.
Check if the water filter is installed correctly and that the doors are closing properly. Inspect the water supply line for leaks and ensure that the defrost drain is not clogged. If the issue continues, seek professional repair assistance.