Samsung RS263TD Quick Start Guide
![Samsung RS263TD Refrigerator manual cover](/images/AmorDYvBAWBfTexejLQXgdnf/thumbs/thumb175x175.webp)
To change the water filter, locate the water filter compartment inside the fridge, turn the old filter counterclockwise to remove it, insert the new filter and turn it clockwise until it locks into place. Run water through the dispenser for 5 minutes to clear any air or impurities.
First, ensure the refrigerator is plugged in and the thermostat is set to the correct temperature. Check if the door seals are closing properly. Clean the condenser coils and ensure that there's adequate airflow around the refrigerator. If the problem persists, contact a service technician.
To adjust the temperature, locate the control panel on the front of the refrigerator. Use the 'Freezer' and 'Fridge' buttons to set your desired temperature. Wait 24 hours for the new settings to stabilize.
Water pooling could be due to a blocked defrost drain. Clear any debris from the drain located at the back of the fridge. You can also check the water line for leaks. If unresolved, consider contacting a technician.
It is recommended to clean the condenser coils every 6 months. This helps maintain efficiency and prolongs the lifespan of the refrigerator.
To reset the refrigerator, unplug it from the power outlet for about 5 minutes, then plug it back in. You can also use the reset button located on the control panel if available.
To activate Power Freeze, press and hold the 'Freezer' button for 3 seconds until the indicator light turns on. This will rapidly lower the freezer temperature to expedite the freezing process.
Ensure the ice maker is turned on and the water supply line is connected. Check for any blockages in the ice maker compartment and reset the ice maker if necessary. If the issue continues, a service call may be required.
Keep the refrigerator and freezer full but not overcrowded to maintain optimal air circulation. Avoid frequent door openings and ensure door seals are tight. Regularly clean the condenser coils and set the temperature to the recommended settings.
Remove all food items and shelves. Use a mixture of baking soda and warm water to wipe down the interior surfaces. Rinse with clean water and dry with a soft cloth before replacing the shelves and food.