Samsung RS25H5111 Quick Start Guide

To adjust the temperature, locate the control panel on the front of the refrigerator. Use the 'Fridge' and 'Freezer' buttons to set your desired temperatures. The ideal setting is 37°F for the fridge and 0°F for the freezer.
First, ensure the refrigerator is plugged in and the power is on. Check the temperature settings and make sure the vents inside are not blocked. Clean the condenser coils if needed and verify the door seals are intact.
It is recommended to replace the water filter every six months or when the indicator light turns on to ensure optimal water quality and flow.
Check that the ice maker is turned on and connected to a water source. Ensure the freezer temperature is set correctly and clear any ice blockages from the dispenser chute.
To manually defrost, remove all food and unplug the refrigerator. Leave the doors open for several hours to allow ice to melt, then clean and dry the compartments before plugging it back in.
Unusual noises can be due to the refrigerator being uneven or items vibrating. Ensure the unit is level and secure, and check for any items that might be causing noise vibrations inside.
Unplug the refrigerator and locate the condenser coils at the back or bottom. Use a vacuum or a brush to gently remove dust and debris, ensuring efficient cooling performance.
To reset the control panel, unplug the refrigerator for about 5 minutes, then plug it back in. This can resolve minor glitches or errors in the system.
Check for obstructions in the door seal area and ensure the refrigerator is not overloaded. Inspect the door gasket for damage and replace it if necessary.
Unplug the refrigerator and locate the light cover inside the compartment. Remove the cover and replace the bulb with a new one of the same type and wattage. Reattach the cover and plug the unit back in.