Samsung RS25H5000 Quick Start Guide
![Samsung RS25H5000 Refrigerator manual cover](/images/TcFEIEOGzsgQKjAvhIZsUSnl/thumbs/thumb175x175.webp)
To reset the filter indicator, press and hold the "Alarm/Hold for 3 sec for Filter Reset" button for about 3 seconds until the indicator light turns off.
Check if the refrigerator is plugged in and the power is on. Ensure the vents are not blocked by food items and that the temperature settings are correct. If the issue persists, it might require professional servicing.
It is recommended to clean the condenser coils every 6 to 12 months to ensure efficient operation.
Ensure the door seals are clean and not damaged. Avoid leaving the door open for extended periods and ensure it's closed tightly after use.
Use a mixture of warm water and mild detergent. Avoid abrasive cleaners that can damage the surfaces. Wipe down and dry with a clean cloth.
Locate the filter inside the refrigerator compartment. Turn the filter counterclockwise to remove it and insert the new filter, turning it clockwise until it locks in place.
Some noise is normal, but if it's excessive, check for loose components or items inside. Also, ensure the refrigerator is level and not touching the wall or other surfaces.
Try resetting the refrigerator by unplugging it for a few minutes and then plugging it back in. If the issue persists, consult the user manual or contact customer support.
Keep the refrigerator in a cool, well-ventilated space away from heat sources. Ensure the door seals are intact, and avoid frequent door openings.
Remove perishable items, adjust the temperature settings, and ensure doors are closed tightly. If you'll be away for an extended period, consider emptying and unplugging the refrigerator.