Samsung RF26VAB Quick Start Guide

To reset the filter indicator light, press and hold the "Ice Type" and "Filter Reset" buttons simultaneously for about 3 seconds. The light should turn off.
Ensure that the refrigerator is plugged in and the temperature settings are correct. Check for any obstructions in the vents and ensure the doors are closing properly. If the issue persists, consider cleaning the condenser coils.
To clean the water dispenser, mix a solution of vinegar and water, then use a clean cloth to wipe down the dispenser area. Run a few cups of water through the system to rinse.
The ideal temperature for the refrigerator section is 37°F (3°C) and 0°F (-18°C) for the freezer section. Adjust as needed for optimal performance.
Water pooling could be due to a clogged defrost drain. Clean the drain using warm water and a small brush. Ensure the drain is free of debris.
Locate the water filter in the upper right corner of the refrigerator section. Turn the filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it locks into place.
Check if the ice maker is turned on and the water line is connected properly. Ensure the freezer temperature is set correctly. If the problem persists, consider inspecting the ice maker for blockages or defects.
Ensure the refrigerator is level and not touching any walls or cabinets. Check for loose items inside. If noises continue, verify that the compressor and fans are functioning correctly.
The Samsung RF26VAB is a frost-free model, so manual defrosting is not necessary. However, if frost builds up, check the door seals and temperature settings.
Regular maintenance includes cleaning the condenser coils every 6 months, changing the water filter every 6 months, and checking the door seals for proper closure.