Samsung RF267A Quick Start Guide
![Samsung RF267A Refrigerator manual cover](/images/mceRuJTwfawYtgBeYjkZnUKR/thumbs/thumb175x175.webp)
To reset the filter indicator light, press and hold the "Ice Type" and "Child Lock" buttons simultaneously for 3 seconds until the light turns off.
Ensure that the refrigerator is plugged in and the temperature settings are correct. Check that the vents are not blocked and clean the condenser coils if needed.
It is recommended to replace the water filter every 6 months or when the filter indicator light turns red.
Check if the refrigerator is level and ensure that it is not touching the wall. Verify that nothing inside the fridge is vibrating against each other.
Press the "Fridge" or "Freezer" button on the control panel to cycle through the temperature options until you reach the desired setting.
Use a mixture of mild dish soap and warm water to clean the interior. Rinse with a clean damp cloth and dry thoroughly. Avoid using abrasive cleaners.
Check the water supply line for leaks and ensure that the drain hole at the back of the refrigerator is not clogged.
Unplug the refrigerator, remove the cover of the light, and replace the bulb with a new one of the same type and wattage.
Ensure the ice maker is turned on and the water supply is connected. Check for any ice blockages in the ice maker compartment.
To perform a factory reset, unplug the refrigerator for about 10 minutes and then plug it back in. Re-enter your temperature settings as needed.