Samsung RF18H Quick Start Guide

To reset the filter indicator light, press and hold the "Ice Type" or "Alarm/Filter Reset" button for 3 seconds until the light turns off.
Ensure that the refrigerator is plugged in and the temperature settings are correct. Check for any obstructions in the vents and ensure the door seals are clean and intact. If the issue persists, consider contacting Samsung support.
To change the temperature settings, press the "Freezer" or "Fridge" button until the desired temperature is displayed. Each press will adjust the temperature incrementally.
It is recommended to clean the condenser coils every six months, replace the water filter every six months, and regularly clean the interior and door seals to ensure optimal performance.
To turn off the ice maker, locate the ice maker switch and set it to the "Off" position. Alternatively, you can raise the ice maker lever to stop ice production.
Check if the water filter is installed correctly and ensure the drain tube is not clogged. Verify that the refrigerator is level and the doors are closing properly. If the issue continues, consider contacting a service technician.
Ensure the refrigerator is level and not touching any walls or cabinets. Check for any loose items inside the refrigerator that may vibrate. If the noise persists, consult the user manual or contact support for further assistance.
Press and hold the "Fridge" button for Power Cool or the "Freezer" button for Power Freeze for 3 seconds. This will temporarily lower the temperature to quickly cool the fridge or freezer contents.
Check if the refrigerator is properly plugged in and ensure there is power at the outlet. Try resetting the refrigerator by unplugging it for a few minutes and then plugging it back in. If the display still does not work, contact Samsung support.
Use a soft cloth and mild detergent to clean the water dispenser area. Remove any buildup and ensure the nozzle is clear. Rinse with clean water and dry thoroughly.