Samsung CoolSelect Pantry RF23R6201 Quick Start Guide
![Samsung CoolSelect Pantry RF23R6201 Refrigerator manual cover](/images/wgMUTaDEJiIynUSVqcsCqjLL/thumbs/thumb175x175.webp)
To set the temperature, locate the control panel on the inside of the refrigerator. Press the 'CoolSelect Pantry' button to cycle through the available settings: Deli, Fresh, and Chilled. Choose the setting that best suits your storage needs.
First, ensure the ice maker is turned on and the water line is properly connected. Check if the ice maker is jammed by gently opening the freezer door and inspecting for any ice blockages. If the problem persists, try resetting the ice maker by pressing the reset button located on the side of the ice maker.
To clean the water filter, first turn off the water supply. Remove the filter by turning it counterclockwise. Rinse the filter under running water to remove any sediments. Reinstall the filter by turning it clockwise until it locks, and turn the water supply back on.
If your refrigerator is making a loud noise, it could be due to the condenser fan or the evaporator fan motor. Check for obstructions around the fan blades and remove any debris. If the noise continues, consider contacting a technician as the motor may need replacing.
To manually defrost the CoolSelect Pantry, first remove all items from the compartment. Turn off the refrigerator using the control panel. Leave the pantry open to allow the ice to melt naturally. Once defrosted, clean any water residue and restart the refrigerator.
Store raw meat and seafood in the CoolSelect Pantry on the 'Chilled' setting. Keep fruits and vegetables in the crisper drawers. Place frequently used items at eye level, and use the door bins for condiments and beverages. This ensures optimal airflow and temperature consistency.
Ensure that the refrigerator is plugged in and the door is sealing properly. Check the temperature settings and ensure they are at recommended levels. Clean the condenser coils if they are dusty, and make sure the vents inside the refrigerator are not blocked by food items.
Yes, the crisper drawers have adjustable humidity controls. Slide the control to 'High' for leafy vegetables to retain moisture, or 'Low' for fruits to reduce moisture. This helps maintain the freshness of your produce.
After replacing the water filter, reset the indicator light by pressing and holding the 'Filter Reset' button on the control panel for about 3 seconds. The light should change from red to off, indicating a successful reset.
Regularly clean the interior and exterior surfaces with a mild detergent. Replace the water filter every 6 months. Vacuum the condenser coils twice a year to prevent dust buildup. Ensure door seals are clean and intact to maintain cooling efficiency.