Parrot Asteroid Classic Car Kit Quick Start Guide
![Parrot Asteroid Classic In-Car Multimedia System Car Kit manual cover](/images/6f8fcf0e94384977e8d2b16e/thumbs/thumb175x175.webp)
To connect your smartphone, ensure Bluetooth is enabled on your device. On the Parrot Asteroid Classic, navigate to the Bluetooth menu and select 'Pair New Device.' Follow the on-screen instructions to complete pairing.
If the screen freezes, try performing a soft reset by pressing and holding the power button for 10 seconds. If the issue persists, check for firmware updates or consult the user manual for further troubleshooting steps.
To update the firmware, download the latest update from the Parrot website onto a USB drive. Insert the USB drive into the Parrot Asteroid Classic, then follow the on-screen instructions to complete the update process.
Ensure the microphone is properly connected and not obstructed. Check the settings to make sure voice recognition is enabled. If problems persist, perform a microphone test in the settings menu.
To reset the device to factory settings, go to the settings menu, select 'System,' then 'Factory Reset.' Confirm your selection and follow the prompts to complete the reset.
The Parrot Asteroid Classic supports various audio formats including MP3, WMA, AAC, and WAV. Ensure your audio files are in one of these formats for optimal compatibility.
To improve GPS signal reception, ensure the GPS antenna is correctly installed and unobstructed. Avoid placing it near metal objects or devices that may cause interference.
Yes, you can customize the home screen by selecting 'Customize Home Screen' in the settings menu. You can rearrange, add, or remove widgets according to your preferences.
Connect the device to a Wi-Fi network, then navigate to the 'Settings' menu and select 'Software Update.' Follow the on-screen instructions to check for and install available updates.
The Parrot Asteroid Classic allows you to pair multiple devices, but only one device can be actively connected at a time. To switch devices, disconnect the current device and connect the desired one from the Bluetooth menu.