Nespresso Lattissima Premium & Original Descaling Guide
![Nespresso Lattissima Premium & Original manual cover](/images/3b3cc43e837c07f51f8598c9/thumbs/thumb175x175.webp)
To descale your Nespresso Lattissima, fill the water tank with a descaling solution and water as per the instructions on the descaling kit. Place a container under the coffee outlet, start the descaling process by pressing the necessary button combination on your specific model, and follow the on-screen or manual instructions. Rinse thoroughly after the process.
Ensure that the water tank is filled, the capsule is properly inserted, and the machine is turned on. If the problem persists, perform a cleaning cycle and check for any blockages in the spout.
Disassemble the milk frother components and rinse them thoroughly under warm water after each use. For a deeper clean, use a mild detergent and a soft brush. Ensure all parts are completely dry before reassembling.
Check if the water tank is properly seated and that seals are not worn out. Inspect the drip tray and ensure it is not full. If leaks persist, contact customer support for further assistance.
To reset your Lattissima machine, hold down the Lungo button for 5 seconds until the LED blinks rapidly three times. This will reset the machine to its default settings.
You should regularly clean the drip tray, water tank, and capsule container. Descale the machine every 2-3 months, depending on usage and water hardness. Clean the milk frother after each use.
Ensure the milk frother is clean and use fresh, cold milk. Adjust the froth density setting if available, and make sure the milk container is properly connected.
Flashing lights can indicate various statuses such as heating up, descaling required, or a water tank refill. Refer to the user manual for specific light patterns and their meanings.
It is recommended to use Nespresso capsules as they are designed specifically for your machine, ensuring optimal performance and taste. Using non-Nespresso capsules may affect the machine's operation and void the warranty.
Preheat your cup by rinsing it with hot water before brewing. Ensure the machine is fully warmed up, and check that the water temperature setting is at the desired level if adjustable.