Contents

SAFETY PRECAUTIONS
Revisions
INTRODUCTION
CONTENTS
About Manuals
How the manual describes the explanation is shown below.
Abbreviations and Terms in This Manual
1. GENERAL DESCRIPTION
- 1.1 Functions Lists
- 1.2 FX Series Programming
- 1.3 Basic Key Specifications
2. SYSTEM CONFIGURATION
- 2.1 Connection from the Serial Port
- 2.2 Connection from the Interface Boards
- 2.3 System Equipment Lists
- 2.4 Precautions for Handling Project on the Version of SW4D5C-GPPW or earlier
3. COMMON OPERATIONS
- 3.1 List of Shortcut Keys and Access Keys
- 3.2 Project Designation
  - 3.2.1 Saving a project
  - 3.2.2 Opening a project
- 3.3 Cut, Copy, and Paste
  - 3.3.1 Cut and paste
  - 3.3.2 Copy and paste
  - 3.3.3 Notes on cutting, copying and pasting network parameters
- 3.4 Toolbar
- 3.5 Status Bar
- 3.6 Zooming in on or out of the Edit Screen
- 3.7 Project Data List
- 3.8 Comment Display
- 3.9 Statement Display
- 3.10 Note Display
- 3.11 Device Name Display
- 3.12 Comment Format
4. INITIALIZATION
- 4.1 Creating a Project
5. HANDLING PROJECT FILES
- 5.1 Opening the Existing Project File
- 5.2 Closing a Project File
- 5.3 Saving a Project
- 5.4 Saving a Project with a New Name
- 5.5 Deleting a Project
- 5.6 Verifying Data in Projects
- 5.7 Copying a Project
- 5.8 Adding Data to a Project
- 5.9 Copying Data within a Project
- 5.10 Deleting Data in a Project
- 5.11 Renaming Data in a Project
- 5.12 Changing the Ladder and SFC with each other
- 5.13 Changing the PLC Type of a Project
- 5.14 Reading Other Format Files
  - 5.14.1 Reading GPPQ, GPPA, FXGP(DOS) or FXGP(WIN) files
  - 5.14.2 Reading a MELSEC MEDOC format file (Printout)
  - 5.14.3 Reading a MELSEC MEDOC format file
- 5.15 Exporting GPPQ, GPPA, FXGP(DOS) or FXGP(WIN) Files
- 5.16 About Macros
  - 5.16.1 Registering a macro
  - 5.16.2 Utilizing a macro
  - 5.16.3 Deleting a macro
  - 5.16.4 Displaying macro references
- 5.17 Starting Multiple Projects
- 5.18 Existing GPPW
6. CREATING CIRCUIT
- 6.1 Restrictions on Circuit Creation
  - 6.1.1 Restrictions in circuit display window
  - 6.1.2 Restrictions in circuit edit window
- 6.2 Creating and Editing Circuits
  - 6.2.1 Inputting contacts and application instructions
  - 6.2.2 Inputting lines (vertical and horizontal)
  - 6.2.3 Deleting contacts and application instructions
  - 6.2.4 Deleting connecting lines
  - 6.2.5 Inserting and deleting in circuit blocks
  - 6.2.6 Inserting NOPs
  - 6.2.7 Deleting NOPs
  - 6.2.8 Cutting, copying and pasting circuits
  - 6.2.9 Undo the last operation
- 6.3 Changing T/C Setting Values
- 6.4 Find and Replace
  - 6.4.1 Finding a device
  - 6.4.2 Finding an instruction
  - 6.4.3 Finding a step No.
  - 6.4.4 Finding a character string
  - 6.4.5 Finding a contact/coil
  - 6.4.6 Finding data
  - 6.4.7 Replacing a device
  - 6.4.8 Replacing an instruction
  - 6.4.9 Changing A and B contacts
  - 6.4.10 Replacing a character string
  - 6.4.11 Changing the statement or note type
  - 6.4.12 Replacing data
  - 6.4.13 Searching for a contact coil
  - 6.4.14 Searching for a device-use instruction
7. CREATING INSTRUCTION LIST
- 7.1 Common Notes on Instruction List Creation
- 7.2 Creating a Program Instruction list
  - 7.2.1 Inputting a contact or application instruction
  - 7.2 2 Changing the existing program in overwrite mode
  - 7.2.3 Inserting or adding the existing program
  - 7.2.4 Deleting the existing program list
  - 7.2.5 Inserting NOPs
  - 7.2.6 Deleting NOPs
- 7.3 Find and Replace
  - 7.3.1 Finding a device
  - 7.3.2 Finding an instruction
  - 7.3.3 Finding a step No.
  - 7.3.4 Finding a character string
  - 7.3.5 Finding a contact/coil
  - 7.3.6 Replacing a device
  - 7.3.7 Replacing an instruction
  - 7.3.8 Changing an A or B contact
  - 7.3.9 Replacing a character string
  - 7.3.10 Changing the statement or note type
  - 7.3.11 Searching for a contact coil
  - 7.3.12 Searching for an instruction using a device
- 7.4 Display
  - 7.4.1 Displaying a device name
- 7.5 Switching Read and Write Modes
  - 7.5.1 Switching to read mode
  - 7.5.2 Switching to write mode
  - 7.5.3 Switching to circuit mode
- 7.6 Changing T/C Setting Values
8. CONVERSION
9. SETTING DEVICE COMMENTS
- 9.1 Points to be Noted before Comment Creation with GPPW
  - 9.1.1 Editing comments only on peripheral devices
  - 9.1.2 Writing to ACPU/GPPA file
  - 9.1.3 Reading from ACPU/GPPA file
  - 9.1.4 Writing to QCPU(Qmode) QnACPU/GPPQ file
  - 9.1.5 Reading from QCPU(Qmode) QnACPU
  - 9.1.6 Writing to FXCPU/FXGP(DOS), FXGP(WIN) file
  - 9.1.7 Reading from FXCPU/FXGP(DOS), FXGP(WIN) file
- 9.2 List of Device Comments
- 9.3 Common Comments and Comments by Program
- 9.4 Creating Device Comments
  - 9.4.1 Creating device comments on the device comment edit window
  - 9.4.2 Creating device comments for the created circuit
  - 9.4.3 Creating device comments after creating a circuit
  - 9.4.4 Editing comments on the ladder editing screen
- 9.5 Deleting Device Comments
  - 9.5.1 Deleting all device comments and device names
  - 9.5.2 Deleting display device comments and device names
- 9.6 Setting Comment Types
- 9.7 Setting Comment Ranges
10. SETTING STATEMENTS AND NOTES
- 10.1 Statement
- 10.2 Note
- 10.3 Creating and Deleting Statements
  - 10.3.1 When editing the circuit window
  - 10.3.1(1) Creating statements in the circuit edit window
  - 10.3.1(2) Deleting statements in the circuit edit window
  - 10.3.2 When editing the list window
  - 10.3.2(1) Editing statements on the list edit window
  - 10.3.2(2) Deleting statements on the list edit window
  - 10.3.3 Creating statements in the statement edit mode
- 10.4 Creating and Deleting Notes
  - 10.4.1 Creating notes on the circuit edit window
  - 10.4.1 (1) Creating notes on the circuit edit window
  - 10.4.1 (2) Deleting notes in the circuit edit window
  - 10.4.2 Creating notes in the list edit window
  - 10.4.2 (1) Creating notes in the list edit window
  - 10.4.2 (2) Deleting notes in the list edit window
  - 10.4.3 Creating notes in the note edit mode
11. SETTING DEVICE MEMORY (DWR SETTING)
- 11.1 Device Memory
- 11.2 Device Value Input
- 11.3 All Clear
  - 11.3.1 Clearing all devices
  - 11.3.2 Clearing all display devices
- 11.4 Making Fill Settings
12 SETTING DEVICE INITIALIZATION VALUES
13. SETTING THE PLC PARAMETERS
- 13.1 Common Notes on Parameters
- 13.2 Setting the PLC Parameters
- 13.3 PLC Parameter Item Lists
- 13.4 Explanations for PLC Parameter Setting Screen
14. SETTING THE NETWORK PARAMETERS
- 14.1 About Items Common to the Network Parameters
- 14.2 Setting the Network Parameters
- 14.3 Network Parameter Item Lists
- 14.4 Explanations for Network Parameter Setting Screen
15. PRINT
- 15.1 Setting Up a Printer
- 15.2 Setting a Page Layout
- 15.3 Previewing a Print Image
- 15.4 Printing
- 15.5 Setting the Details for Printing
  - 15.5.1 Creating a title
  - 15.5.2 Setting a ladder print range
  - 15.5.3 Setting a Instruction list print range
  - 15.5.4 Setting a TC setting value print range
  - 15.5.5 Setting a device comment print range
  - 15.5.6 Setting a device use list print range
  - 15.5.7 Setting a device memory print range
  - 15.5.8 Setting a device initial value print range
  - 15.5.9 Setting a PLC parameter print item
  - 15.5.10 Setting a network parameter print item
  - 15.5.11 Setting a list of contact coil used
  - 15.5.12 Displaying a project contents list
  - 15.5.13 Setting the TEL data print area
- 15.6 Print Examples
16. OTHER FUNCTIONS
- 16.1 Checking Programs
- 16.2 Merging Programs
- 16.3 Checking Parameters
- 16.4 All-clearing the Parameters
- 16.5 IC Memory Card (GPPW <--> IC Memory Card)
  - 16.5.1 Reading the data of the IC memory card
  - 16.5.2 Writing data to the IC memory card
- 16.6 Intelligent Function Utility
- 16.7 Transferring ROM Data
  - 16.7.1 ROM reading, writing, and verification
  - 16.7.2 Writing to files in ROM format
- 16.8 Batch-Deleting the Unused Device Comments
- 16.9 Customizing Keys
- 16.10 Setting Options
- 16.11 Displaying Multiple Windows
- 16.12 Opening a Specific Project Using a Shortcut
- 16.13 Starting the Ladder Logic Test Tool
- 16.14 Outline of Help Function
17. CONNECTING A PLC
- 17.1 Specifying the Connection Target
  - 17.1.1 When accessing the own station
  - 17.1.2 When accessing the other station
- 17.2 Making access via Ethernet, CC-Link, G4 module, C24 or telephone line
  - 17.2.1 Setting method for communication via the ethernet board
  - 17.2.1 (1) For A series
  - 17.2.1 (2) For QnA series
  - 17.2.1 (3) For Q series
  - 17.2.2 Setting Method for Communication Via CC-Link (AJ65BT-G4)
  - 17.2.2 (1) For A series
  - 17.2.2 (2) For QnA series
  - 17.2.3 Setting Method for Communication Via C24
  - 17.2.3 (1) Connection in the form of one-for-one
  - 17.2.3 (2) Connection in the form of multidrop
  - 17.2.4 Setting method for communication via a modem interface module
- 17.3 Using PLC Read/Write
  - 17.3.1 Executing PLC read/PLC write
  - 17.3.2 Setting the read/write range for device data
  - 17.3.3 Setting the program reading/writing range
  - 17.3.4 Setting the comment read/write range
- 17.4 Verifying the Peripheral Side and PLC Side Data
- 17.5 Write to PLC (Flash ROM)
  - 17.5.1 Write the program memory to ROM
  - 17.5.2 Write to PLC (Flash ROM)
- 17.6 Deleting Data in the PLC
- 17.7 Changing PLC Data Attributes
- 17.8 Reading/Writing PLC User Data
  - 17.8.1 Reading
  - 17.8.2 Writing PLC user data
- 17.9 Executing Online Change
- 17.10 Concept of the Routing Parameters
18. MONITORING
- 18.1 Monitoring, and Stopping/Resuming Monitoring
- 18.2 Monitoring/Stopping Monitoring in All Windows
- 18.3 Editing Programs During Ladder Monitoring
- 18.4 Switching Present Values Between Decimal and Hexadecimal
- 18.5 Batch Monitoring Devices/Buffer Memories
- 18.6 Monitoring after Registering Devices
- 18.7 Setting Monitor Conditions/Stop Conditions
- 18.8 Program List Monitor
- 18.9 Monitoring the Interrupt Program List
- 18.10 Measuring Scan Time
- 18.11 Executing Sampling Trace
  - 18.11.1 Setting execution & status display
  - 18.11.2 Setting trace data
  - 18.11.3 Setting trace conditions
- 18.12 Monitoring the Ladders Registered
- 18.13 Deleting All Ladders Registered
19. DEBUGGING PROGRAMS
- 19.1 Carrying Out a Device Test
- 19.2 Carrying Out Partial Operation
- 19.3 Executing Step Run
- 19.4 Setting the Scan Range
- 19.5 Operating the PLC Remotely
20. REGISTERING KEYWORD/PASSWORDS
- 20.1 Registering Keyword
  - 20.1.1 Registering new keyword/changing keyword
  - 20.1.2 Canceling a keyword
  - 20.1.3 Releasing a keyword
- 20.2 Registering Passwords
  - 20.2.1 Register new passwords/changing passwords
  - 20.2.2 Delete the passwords
  - 20.2.3 Disable the passwords
21. PLC MEMORY
- 21.1 Clearing the PLC Memory
  - 21.1.1 All-clearing on ACPU memory
  - 21.1.2 All-clearing the QCPU, QnACPU device memory
  - 21.1.3 All-clearing an FXCPU memory
- 21.2 Formatting a QCPU(Qmode), QnACPU Memory
- 21.3 Sorting the QCPU(Qmode), QnACPU Memory
- 21.4 Setting for the PLC's Clock
22. DIAGNOSIS
- 22.1 Diagnosing the PLC
  - 22.1.1 Diagnosing an ACPU
  - 22.1.2 Diagnosing a QCPU(Qmode), QnACPU
  - 22.1.3 Diagnosing an FXCPU
- 22.2 Diagnosing a Network
  - 22.2.1 Testing a network
  - 22.2.2 Performing a loop test
  - 22.2.3 Performing a setting confirmation test
  - 22.2.4 Performing a station order confirmation test
  - 22.2.5 Performing a transmission test
  - 22.2.6 Monitoring the error history
  - 22.2.7 Network monitor details
  - 22.2.8 Monitoring other station information
- 22.3 Running CC-Link Diagnostics
  - 22.3.1 Monitoring the line (own station)
  - 22.3.2 Conducting a line test
  - 22.3.3 Monitoring the lines (other stations)
- 22.4 System Monitor
23 SETTING A6TEL/Q6TEL/FX2N DATA
- 23.1 Function Setting Item List
- 23.2 Preparations for Connecting the Telephone Line
  - 23.2.1 Making remote access/pager notice (for ACPU)
  - 23.2.2 Making remote access/pager notice (for QnACPU)
  - 23.2.3 Making remote access to FXCPU
  - 23.2.4 Making Q6TEL-Q6TEL communication
- 23.3 Making Initial Setting of Data
  - 23.3.1 Creating a phone number book
  - 23.3.2 Registering the AT command
  - 23.3.3 Registering A6TEL data
  - 23.3.4 Registering Q6TEL data
  - 23.3.5 Setting the FX PLC
- 23.4 Connecting/Disconnecting the Line
  - 23.4.1 Connecting the line automatically
  - 23.4.2 Connecting the line via a switchboard (manual connection)
  - 23.4.3 Disconnecting the line
APPENDICES
- Appendix 1 GPP Function Access Ranges in MELSECNET(II/10) Systems
  - 1.1 Access Range with MELSECNET(II)
  - 1.2 Access Range for an A Series Start
  - 1.3 Access Range for a QnA Series Start
  - 1.4 Access Range at Q Series Start
- Appendix 2 MELSECNET/10 Board Access Range
  - 2.1 MELSECNET/10 Board
    - 2.1.1 "A" series start
    - 2.1.2 QnA series start
    - 2.1.3 At Q series start
  - 2.2 Access Range via an Ethernet Board
  - 2.3 Access Range via CC-Link (AJ65BT-G4)
  - 2.4 Access Range via Computer Link
  - 2.5 Access Range via Serial Communication
  - 2.6 Access Range for Mixed System
- Appendix 3 Using Data of Other Applications
  - 3.1 Using Excel Files as Device Comments
  - 3.2 Using a Word File as a Device Comment
- Appendix 4 Restrictions on PLC Type Change
- Appendix 5 Examples of Wiring RS-232C Cable for Connection of C24 and Peripheral Device
  - 5.1 A Series
  - 5.2 QnA Series
  - 5.3 Q Series
- Appendix 6 ROM Writer Wiring Examples
- Appendix 7 QnA Series Version Compatibility Table
- Appendix 8 Restrictions and Cautions
- Appendix 9 About SW [] D5-GPPW Compatibility
- Appendix 10 GPPW and LLT Operations
- Appendix 11 Notes on FX Series Programming
  - 11.1 Ladder Monitor Display
  - 11.2 Handling of Comments
- Appendix 12 Instruction Conversion Lists
  - 12.1 Instruction Conversion List for A <--> Q/QnA Conversions
  - 12.2 A Instruction Conversion List for FX Series Conversions
  - 12.3 List of Instruction Conversions for Change between Q Series and A/QnA Series
- Appendix 13 About the A6TEL/Q6TEL
  - 13.1 A6TEL/Q6TEL Switch Settings
  - 13.2 How to Change the Proximate Mode of the Q6TEL
- Appendix 14 Functions Added to Update from SW4D5-GPPW

Mitsubishi Electric GPP Function Operating Manual

Mitsubishi Electric GPP Function manual cover

Pages 606

Year 2000

Language(s)

of 606

Mitsubishi Electric GPP Function Specification

The Mitsubishi Electric GPP (Graphic Programming Package) Function is designed to enhance the programming and operation of Mitsubishi's range of PLCs (Programmable Logic Controllers). It provides an intuitive interface for engineers to create, modify, and troubleshoot PLC programs efficiently. The GPP Function supports ladder logic, which is widely used in industrial automation, offering a graphical representation of the control processes. This functionality is compatible with Mitsubishi's MELSEC series PLCs, ensuring seamless integration and operation.

The software is equipped with a variety of tools to optimize program development, including simulation capabilities that allow users to test and validate control logic without the need for physical hardware. This feature significantly reduces development time and minimizes errors before deployment. Additionally, the GPP Function offers comprehensive monitoring and debugging tools that enable real-time observation of the PLC's operation, making it easier to identify and rectify issues.

The software supports multiple programming languages, adhering to the IEC 61131-3 standard, which enhances flexibility and caters to a broader range of automation tasks. The user interface is designed for ease of use, with drag-and-drop functionality and customizable toolbars, facilitating a smooth workflow. Furthermore, the GPP Function includes extensive documentation and help resources to assist users in navigating its features.

Incorporating the Mitsubishi Electric GPP Function into automation projects enhances productivity through its robust set of features that streamline the programming process, ensure reliability, and support complex industrial applications. This makes it an invaluable tool for engineers looking to maximize the performance and efficiency of Mitsubishi's PLC systems.

Mitsubishi Electric GPP Function F.A.Q.

What is the Mitsubishi Electric GPP Function?

The Mitsubishi Electric GPP Function is a set of tools used for programming and configuring Mitsubishi PLCs (Programmable Logic Controllers), focusing on graphical programming and user-friendly interfaces.

How do I install the Mitsubishi Electric GPP Function software?

To install the GPP Function software, download the installation package from the Mitsubishi Electric website, run the installer, and follow the on-screen instructions. Ensure you have administrative privileges on your computer.

What are the system requirements for running the GPP Function software?

The GPP Function software typically requires a Windows operating system (7 or later), at least 2GB RAM, 500MB of free disk space, and a compatible Mitsubishi PLC.

How can I troubleshoot connection issues between my PC and the PLC using GPP Function?

Check the cable connections, ensure the correct COM port is selected, verify the PLC is powered on, and confirm that the correct drivers are installed.

How do I update my PLC program using GPP Function?

Connect your PC to the PLC, open the GPP Function software, load your updated program, and use the transfer tool to upload the new program to the PLC.

What should I do if the GPP Function software crashes frequently?

Ensure your software is up to date, check for any conflicting software or drivers, increase your system's RAM, and verify your system meets the minimum requirements.

How can I back up my PLC program using GPP Function?

Open the GPP Function software, connect to the PLC, and use the program backup feature to save a copy of your program to your PC.

What are common maintenance practices for ensuring GPP Function software runs smoothly?

Regularly update the software, maintain clean and secure connections, backup programs frequently, and perform regular system checks for any hardware or software issues.

Can I simulate PLC operations using the GPP Function?

Yes, the GPP Function software includes simulation tools that allow you to test and verify your PLC programs without needing the physical hardware.

How do I access technical support for GPP Function issues?

Visit the Mitsubishi Electric support website for resources, or contact their technical support team via phone or email for assistance.