KORG PitchCrow-G Owner's Manual

To calibrate the KORG PitchCrow-G, press the calibration button until the desired reference pitch (usually 440Hz) is displayed. Use the up and down buttons to adjust as needed.
Ensure that the battery is correctly installed and has sufficient charge. Replace the battery if necessary. Also, check the power switch to make sure it is in the 'on' position.
Yes, the PitchCrow-G can tune any instrument within its detection range. However, it is primarily optimized for guitar and bass.
Press the mode button to toggle between guitar and bass modes. The display will indicate the current mode.
An error message or unusual symbols may indicate a malfunction or that the device needs resetting. Turn off the tuner, remove the battery, wait a few seconds, and then reinstall the battery.
To replace the battery, open the battery compartment on the back of the tuner, remove the old battery, and insert a new CR2032 battery ensuring the correct polarity.
The battery life of the PitchCrow-G is approximately 24 hours of continuous use. It is recommended to turn off the tuner when not in use to conserve battery life.
Open the clip and attach it to the headstock of your instrument. Ensure that it is securely fastened for accurate tuning.
Ensure the tuner is correctly clipped onto the instrument, the instrument is properly strung, and play a note firmly. If it still fails, check the battery and connections.
Yes, the PitchCrow-G works with both left-handed and right-handed guitars. Simply attach it as you would with any guitar, ensuring it is secure.