KORG Pitchclip 2 Owner's Manual
![KORG Pitchclip 2 manual cover](/images/1767210a76683f5ac7f52630/thumbs/thumb175x175.webp)
Open the clip and attach the Pitchclip 2 to the headstock of your guitar, ensuring that the display is facing you for easy visibility. Make sure it is securely fastened and not obstructing the strings.
First, check if the battery is installed correctly and has sufficient charge. If the issue persists, replace the battery with a new CR2032 lithium coin battery.
Press the power button repeatedly to cycle through the available tuning modes until you reach the desired setting. The display will indicate the current mode.
Yes, you can calibrate the Pitchclip 2 by holding down the power button until the calibration mode is activated. Use the button to adjust the reference pitch in 1 Hz increments.
Ensure the tuner is positioned correctly and there's minimal background noise. If the problem continues, try replacing the battery or checking the instrument's strings for wear.
Use a soft, dry cloth to gently wipe the surface of the Pitchclip 2. Avoid using cleaning solvents or water as they may damage the electronics.
Slide the battery compartment cover off, remove the old battery, and insert a new CR2032 lithium coin battery with the correct polarity. Replace the cover securely.
Yes, the Pitchclip 2 can be used with various string instruments such as bass guitars, ukuleles, and violins, as long as it can be securely clipped to the instrument.
Flickering could be due to a low battery. Try replacing the battery. If the problem persists, ensure that the tuner is not exposed to extreme temperatures or moisture.
Store the Pitchclip 2 in a dry, safe place when not in use, and avoid exposing it to extreme temperatures. Regularly check the battery and replace it as needed to prevent leakage.