KORG Pitchblack Owner's Manual
![KORG Pitchblack manual cover](/images/ba965f744360acd2848cbace/thumbs/thumb175x175.webp)
To calibrate the KORG Pitchblack, press and hold the "CALIB" button until the desired reference pitch (ranging from 436 to 445 Hz) is displayed. Release the button to set the calibration.
First, check if the power supply is properly connected or if the battery needs replacing. Ensure the power adapter matches the required specifications for the KORG Pitchblack.
Yes, the KORG Pitchblack can accommodate various tunings, including drop tunings. Simply tune your instrument to the desired pitch using the tuner display.
Press the "MODE" button to cycle through different tuning modes, such as Chromatic, Guitar, Bass, and Strobe. Each press will change the mode, shown on the display.
Keep the tuner clean and dust-free by wiping it with a soft, dry cloth. Avoid exposing it to extreme temperatures and humidity. Store it in a protective case when not in use.
Ensure the instrument's input jack is securely connected and that the strings are not muted. Check the calibration settings and adjust if necessary.
This can occur if there is interference or the instrument's signal is too weak. Try using a different cable or verify the instrument's electronics are functioning correctly.
Yes, the KORG Pitchblack is suitable for both guitars and bass guitars. Use the "MODE" button to select the Bass mode for optimal tuning.
Check the input connection and ensure the instrument's volume is turned up. If the problem persists, try a different cable or input source.
Open the battery compartment located on the bottom of the tuner, remove the old battery, and insert a new 9V battery. Ensure the polarity is correct before closing the compartment.