KORG Kaossilator Pro Plus Owner's Manual
![KORG Kaossilator Pro Plus Synthesizer manual cover](/images/uSAwomvKECpkLqXFbXcboNft/thumbs/thumb175x175.webp)
To save a loop, press the WRITE button, choose a bank using the PROGRAM/BANK knob, and press WRITE again to confirm.
Ensure the power adapter is connected properly. Check the outlet and try a different power source. If using batteries, replace them with new ones.
Turn off the unit, hold down the WRITE button, and turn it on while holding the button until the display shows "FACTORY RESET." Press WRITE again to confirm.
Connect a MIDI cable from the MIDI OUT port on the Kaossilator Pro Plus to the MIDI IN port on the external device. Configure the MIDI settings as needed.
The Kaossilator Pro Plus is not designed to function as a standalone audio interface. It is primarily a synthesizer and loop recorder.
Visit the KORG website to download the latest firmware update. Follow the instructions provided in the update package to install it on your device.
The Kaossilator Pro Plus features stereo RCA outputs and a headphone output for monitoring and connecting to external audio equipment.
Press the SCALE button and use the PROGRAM/BANK knob to select the desired scale. Press the SCALE button again and use the same knob to select the key.
Use a soft, dry cloth to gently clean the surface. Avoid using any liquids or harsh chemicals that could damage the unit.
Connect your external audio source to the LINE IN jacks on the Kaossilator Pro Plus. Use the LOOP REC button to start recording the incoming audio.