KORG Beat Boy Owner's Manual
![KORG Beat Boy manual cover](/images/37eb34c0ecdad6e56d083f57/thumbs/thumb175x175.webp)
To update the firmware on your KORG Beat Boy, download the latest firmware from the KORG website, connect your device to a computer via USB, and follow the on-screen instructions provided in the firmware download package.
Ensure the volume is turned up both on the Beat Boy and the connected amplifier or headphones. Check all cables for proper connections and verify that the power is on. If the issue persists, try resetting the device to factory settings.
Press the "Save" button while holding down the desired memory location button. This will store your current rhythm settings for easy recall.
First, check the batteries and replace them if necessary. Alternatively, ensure that the AC adapter is properly connected. If these solutions don't work, contact KORG support for further assistance.
To use the tuner, press the "Tuner" button. Play a single note on your instrument, and adjust the tuning until the display shows the correct pitch. The LED will turn green when in tune.
Use a soft, dry cloth to wipe the exterior of the Beat Boy. Avoid using any chemical cleaners or water. Store the device in a cool, dry place to prevent damage.
Press the "Record" button to start recording your session. Press it again to stop. Your recording will be saved automatically and can be played back using the "Play" button.
Check the tempo settings and make sure they are set correctly. If necessary, reset the Beat Boy to factory settings to resolve any sync issues.
Yes, you can connect the KORG Beat Boy to an external speaker using the headphone or line output jack. Ensure the speaker is compatible with the output specifications of the Beat Boy.
To reset to factory settings, power off the device, then hold down the "Rhythm" and "Tuner" buttons while turning it back on. Follow the prompts to complete the reset process.