KORG AW-2 Owner's Manual
![KORG AW-2 manual cover](/images/1724f2ac236a9f97a2034d2b/thumbs/thumb175x175.webp)
To power on the KORG AW-2 tuner, press the power button located on the front of the device. Ensure that you have a working battery installed.
The KORG AW-2 tuner requires a CR2032 lithium battery for operation.
The AW-2 features a clip that can be attached to the headstock of string instruments. Ensure the clip is securely fastened for accurate tuning.
To switch tuning modes, press the 'MODE' button. This cycles through the available tuning modes: Chromatic, Guitar, and Bass.
If the display does not turn on, check the battery installation for correct orientation, and replace it if necessary. Ensure the battery contacts are clean.
To calibrate the pitch, press the 'CALIB' button. You can adjust the reference pitch in 1 Hz steps, typically between 410 Hz and 480 Hz.
Yes, by using the Chromatic mode, the KORG AW-2 can be used to tune a variety of instruments beyond guitar and bass.
To clean the AW-2, use a soft, dry cloth. Avoid using any solvents or abrasive materials, as they can damage the tuner.
To extend battery life, turn off the tuner when not in use and store it in a cool, dry place. Replace the battery promptly when low.
The KORG AW-2 does not have a specific battery level indicator, but dim display and slower response times can indicate a low battery.