Hotpoint ActiveCare NLLCD 1065 DGD AW UK N Safety Instructions
![Hotpoint ActiveCare NLLCD 1065 DGD AW UK N Washing Machine manual cover](/images/UYsWEEEDBUecinFtDExaLyXH/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent in the dispenser, select the desired wash program using the control panel, and press the start button.
Ensure the machine is properly plugged in and the door is closed securely. Check if the water supply is turned on and the start button has been pressed. Also, verify that the child lock is not activated.
Remove the detergent drawer by pulling it out until it stops, then press the release lever. Clean the drawer with warm water and a soft brush. Reassemble after drying.
Regularly clean the detergent drawer, check and clean the filter, run a maintenance wash using a washing machine cleaner, and wipe the door seal to prevent mold.
Ensure the washing machine is level on the floor, check that the transport bolts have been removed, and avoid overloading the drum. Distribute laundry evenly inside the drum.
Refer to the user manual for the specific error code. Common issues include water supply problems or drainage issues, which may require checking hoses and filters.
Use lower temperature settings, run full loads, and select eco-friendly wash programs. Regular maintenance ensures optimal efficiency.
Yes, the machine offers a delay start function. Set the desired delay time using the control panel before starting the wash cycle.
Check and clean the drain filter, ensure the drain hose is not kinked or blocked, and verify that the pump is functioning correctly.
Yes, select a gentle or delicate wash program and use a suitable detergent for delicate fabrics. Consider using a laundry bag for extra protection.