Hotpoint Active 4 Door HQ9 M2L UK Safety Instructions
![Hotpoint Active 4 Door HQ9 M2L UK Fridge Freezer manual cover](/images/VAmKnATKGTkXxTOaAgjpalfI/thumbs/thumb175x175.webp)
To set the temperature, use the digital display panel on the front of the fridge. Press the 'Fridge' button to adjust the fridge compartment and the 'Freezer' button for the freezer. Recommended temperatures are 4°C for the fridge and -18°C for the freezer.
First, check if the power cord is properly plugged in and the outlet is functional. Ensure the door seals are clean and not damaged. Verify that the vents inside the fridge are not blocked by food items. If issues persist, consider contacting Hotpoint customer service.
The Hotpoint Active 4 Door HQ9 M2L UK has a No Frost feature, so manual defrosting is not required. However, it is good practice to clean the freezer every 6 months to maintain optimal performance.
Use a soft cloth dampened with mild detergent and water to clean the exterior. Avoid using abrasive cleaners or sharp objects that can scratch the surface. Dry with a clean, soft cloth.
Locate the water filter compartment, usually at the top right corner of the fridge. Turn the old filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it locks into place. Run water through the dispenser for a few minutes to clear out any air and loose carbon.
Water pooling can occur if the defrost drain is clogged. To fix this, locate the drain hole at the back of the fridge and clear any debris using a pipe cleaner or a similar tool. Ensure the fridge is slightly tilted backward to allow proper drainage.
Store food in airtight containers and regularly check for and remove expired items. Place an open box of baking soda inside the fridge to absorb odors. Clean the interior with a solution of baking soda and water every few months.
Ensure the ice maker is turned on and the water supply is connected. Check if the ice maker arm is in the down position and not blocked. If the problem persists, reset the ice maker or consult the user manual for further instructions.
Unplug the fridge before starting. Locate the light cover inside the fridge and remove it by unscrewing or unclipping, depending on the model. Replace the bulb with a new one of the same type and wattage, then reattach the cover.
Store raw meats on the bottom shelf to prevent drips onto other foods. Place dairy products on the middle shelves and use the door compartments for condiments and beverages. Ensure air can circulate freely by not overpacking shelves.