Frigidaire FRQG1721AV Owner's Guide

To adjust the temperature on your Frigidaire FRQG1721AV, locate the control panel inside the refrigerator compartment. Use the arrow buttons to increase or decrease the temperature settings for both the refrigerator and freezer sections.
Ensure the refrigerator is plugged in and the thermostat is set correctly. Check the door seals for any gaps or damage. Clean the condenser coils, and ensure there is adequate ventilation around the refrigerator. If the issue persists, contact a service professional.
Locate the water filter compartment inside the refrigerator. Turn the old filter counterclockwise and pull it out. Insert the new filter and turn it clockwise until it locks in place. Run water through the dispenser for a few minutes to clear any air and impurities.
Check if the ice maker is turned on and the water supply line is connected. Clear any ice jams in the ice maker components. Ensure the freezer temperature is set appropriately. If the problem continues, it may require professional repair.
Unplug the refrigerator and locate the condenser coils, usually at the back or bottom. Use a vacuum cleaner or a coil brush to remove dust and debris. Cleaning the coils regularly helps maintain efficient performance.
Unusual noises may be due to the refrigerator not being level, items inside rattling, or the compressor cycling. Ensure it is on a stable surface and not touching the wall. If the noise persists, it might be a sign of a mechanical issue.
Ensure the refrigerator is placed away from heat sources and direct sunlight. Keep the doors closed as much as possible and check the seals for tight closure. Regularly clean the condenser coils and set the temperature to the recommended settings.
The Frigidaire FRQG1721AV is a frost-free model, meaning it automatically defrosts itself. However, if frost buildup is observed, check the door seals and ensure the freezer is not overfilled, which can interfere with proper airflow.
Store raw meat on the bottom shelf to prevent drips, use clear bins for small items, and keep frequently used items at eye level. Make sure there's space between items for air circulation to maintain consistent cooling.
To reset the control panel, unplug the refrigerator for a few minutes and then plug it back in. This can help resolve minor glitches and restore normal operation.