Frigidaire FHWC3660LSA Owner's Guide
![Frigidaire FHWC3660LSA manual cover](/images/09696339cd5ca85e95a49663/thumbs/thumb175x175.webp)
To install the Frigidaire FHWC3660LSA, ensure you have the necessary tools, including a drill, screwdriver, and level. Follow the installation instructions in the manual, ensuring the hood is securely mounted to the wall and that all electrical connections are properly made.
Regularly clean the filters and surfaces of the range hood to prevent grease build-up. Check and replace the light bulbs as needed and ensure the fan operates smoothly without unusual noises.
First, check if the range hood is receiving power. Verify that the circuit breaker hasn’t tripped. If the power supply is fine, inspect the fan switch and wiring for any visible issues. Consider consulting a professional if the problem persists.
To replace the light bulb, ensure the range hood is turned off and cool. Remove the bulb cover by twisting or unfastening it, depending on the model. Replace the old bulb with a new one of the same type and wattage.
Check for any loose parts or obstructions in the fan. Tighten any loose screws and clean the fan blades to ensure they are not unbalanced. If the noise persists, a professional inspection may be necessary.
Yes, the Frigidaire FHWC3660LSA can be used in a ductless configuration with the appropriate charcoal filters. Ensure the charcoal filters are installed to effectively recirculate air.
Clean the filters every 1-3 months, depending on usage. Grease filters can be washed with warm, soapy water, while charcoal filters need to be replaced as they cannot be washed.
The Frigidaire FHWC3660LSA range hood is 36 inches wide, which is suitable for most standard kitchen installations.
To reset the filter indicator light, press and hold the button indicated in the user manual for a few seconds until the light resets. Consult your specific model's manual for precise instructions.
The Frigidaire FHWC3660LSA uses aluminum mesh grease filters and optional charcoal filters for ductless installations. Ensure you use the correct filters for your setup.