Frigidaire FFTR1814TB Owner's Guide
![Frigidaire FFTR1814TB manual cover](/images/e34066a0e69c605f6bd0eaea/thumbs/thumb175x175.webp)
To change the temperature settings, locate the temperature control dial inside the refrigerator. Turn the dial to the desired setting, allowing 24 hours for the temperature to stabilize.
Check if the temperature control is set correctly. Ensure that the refrigerator is not overloaded and that air vents are not blocked. Clean the condenser coils if necessary.
Condenser coils should be cleaned every 6 months to maintain optimal performance. Use a vacuum or brush to remove dust and debris.
Water pooling can be caused by a clogged defrost drain. Clear the drain with warm water to ensure proper drainage.
Ensure food is stored in airtight containers or freezer bags. Avoid placing warm food directly into the freezer.
The recommended setting is usually mid-range, around 37°F for the refrigerator and 0°F for the freezer. Adjust as needed based on usage.
Unusual noises can be due to the refrigerator not being level, items inside vibrating, or normal compressor sounds. Check and adjust as necessary.
First, unplug the refrigerator. Locate the light bulb cover inside the fridge, remove it, and then replace the bulb with one of the same wattage.
Inspect the door seal for any damage or dirt. Clean the seal with warm soapy water and ensure it is aligned correctly. Replace if damaged.
Ensure the refrigerator is placed away from heat sources, keep the condenser coils clean, and make sure the door seals are intact.