Frigidaire FFHT1621TW Owner's Guide
![Frigidaire FFHT1621TW manual cover](/images/08060cf2129f0b087bbecfe7/thumbs/thumb175x175.webp)
To change the temperature settings, locate the temperature control dial inside the refrigerator compartment. Turn the dial to the desired setting, with 1 being the warmest and 7 being the coldest.
Check to ensure the refrigerator is plugged in and the circuit breaker is not tripped. Verify that the temperature control is set correctly. Clean the condenser coils and make sure there's adequate air circulation around the unit.
To defrost the freezer, remove all the contents and unplug the refrigerator. Leave the freezer door open to allow the ice to melt naturally. Clean the interior with a cloth and plug the refrigerator back in.
Unusual noises could be due to the refrigerator not being level. Adjust the leveling legs to stabilize the unit. Check if the noise originates from a loose part or obstruction inside the fan area.
It is recommended to clean the condenser coils every six months to ensure efficient operation. Use a vacuum cleaner or brush to remove dust and debris.
The Frigidaire FFHT1621TW uses a 40-watt appliance bulb. Ensure the refrigerator is unplugged before replacing the bulb.
To reverse the door swing, remove the hinge cover and unscrew the top hinge. Carefully lift the door off and move the hinges to the opposite side. Reattach the door and secure the hinges. Consult the manual for detailed instructions.
Ensure the ice maker is turned on and the water supply is connected. Check for any ice blockages and reset the ice maker by turning it off and then back on. Consult the manual for troubleshooting specific to your model.
Unplug the refrigerator and remove all food items. Use a solution of mild soap and warm water to wipe down the interior surfaces. Rinse with a damp cloth and dry thoroughly before returning food items.
Check the drain pan for overflow and ensure the defrost drain is not clogged. Verify that the refrigerator is level and the door seals are intact. If the issue persists, inspect the water supply line for leaks.