Frigidaire FFHI1835VS Owner's Guide
![Frigidaire FFHI1835VS manual cover](/images/af76a855fd778534ff8dac7b/thumbs/thumb175x175.webp)
To change the water filter, locate the filter compartment inside the refrigerator, turn the old filter counterclockwise to remove it, then insert the new filter and rotate it clockwise until it is secure.
Ensure the refrigerator is plugged in and the thermostat is set to the correct temperature. Check for any obstructions in the vents and ensure the door seals are clean and intact.
The Frigidaire FFHI1835VS is a frost-free model, so manual defrosting is not necessary. However, regular cleaning of the freezer compartment is recommended.
Keep the refrigerator away from heat sources, ensure the door seals are tight, and do not overfill the compartments to allow proper air circulation.
A flashing red light typically indicates a temperature issue. Check the temperature settings and ensure the door is closed properly. If the issue persists, consult the user manual or contact customer support.
Unplug the refrigerator, locate the condenser coils (usually at the back or beneath the unit), and use a vacuum or brush to remove dust and debris.
Check for loose items inside the refrigerator and ensure it is level. Some noise is normal due to the compressor and fans, but persistent loud noises should be inspected by a technician.
Yes, the door swing on the Frigidaire FFHI1835VS can be reversed. Refer to the installation instructions for guidance or contact a professional for assistance.
The recommended temperature setting for the refrigerator is 37°F (3°C) and for the freezer is 0°F (-18°C).
To reset the ice maker, turn it off for 30 seconds using the switch, then turn it back on. If issues persist, refer to the user manual for further troubleshooting.