Epoq EID60W16N Installation Guide
![Epoq EID60W16N manual cover](/images/LYBziZkfFeMAZCjXIYcmZOlC/thumbs/thumb175x175.webp)
To start a wash cycle, load your dishes, add detergent, close the door, select the desired cycle using the control panel, and press the start button.
Check the drain hose for kinks or blockages, clean the filter, and ensure the sink's drain is not clogged. If the problem persists, consult the user manual or contact a professional.
Remove the lower dish rack, twist and lift out the filter unit located at the bottom of the dishwasher, rinse it under running water, and replace it securely.
Error code E1 usually indicates a water supply issue. Ensure that the water inlet valve is open and that the inlet hose is not kinked or blocked.
Yes, tablet detergents can be used. Place the tablet in the detergent dispenser and ensure it is properly closed before starting a cycle.
Ensure that you have selected a drying cycle option. Check that the rinse aid dispenser is filled, as rinse aid significantly improves drying performance.
Regularly clean the filter, check and clean the spray arms, inspect the door gasket for any debris, and run a cleaning cycle with a dishwasher cleaner monthly.
To reset, turn off the dishwasher, unplug it from the power source, wait for about 5 minutes, then plug it back in and turn it on.
Check for obstructions such as utensils sticking out, ensure the racks are properly aligned, and inspect the door latch for any damage.
Ensure that dishes are properly loaded and not touching each other or the spray arms. Check for any loose items in the dishwasher, and inspect the spray arms for blockages.