Epoq EDW60W16N Instruction Manual
![Epoq EDW60W16N manual cover](/images/kovOFHVEoUWgshQlCekIGpxB/thumbs/thumb175x175.webp)
To reset the Epoq EDW60W16N Dishwasher, press and hold the "Start/Reset" button for 3 seconds until the control panel lights up. This will clear any settings and restart the dishwasher.
If the dishwasher is not draining, check the filter for blockages, ensure the drain hose is not kinked, and inspect the drain pump for obstructions. Clean or replace parts as necessary.
To clean the spray arms, remove them from the dishwasher, rinse under running water to clear debris, and use a toothpick to unclog any blocked holes. Reinstall them once clean.
A white residue could be due to hard water. Use a rinse aid to improve drying and reduce residue, or consider adding a water softener if the problem persists.
Load dishes with the dirty side facing the spray arms. Avoid overcrowding, ensuring water can reach all surfaces. Place larger items at the sides and back, and smaller items in the front.
It is recommended to clean the dishwasher filter once a month to prevent food particles from clogging and to maintain efficient performance.
Loud noises can be caused by items touching the spray arms. Ensure dishes are properly loaded and check for loose parts or foreign objects inside the dishwasher.
Use detergents specifically designed for automatic dishwashers. Avoid using hand dishwashing liquids. Check the manual for any specific brand recommendations.
Ensure the dishwasher is plugged in and the door is fully closed. Check the circuit breaker and ensure the control panel is not locked. Refer to the manual for additional troubleshooting tips.
Regularly clean the filter, check and clean the spray arms, use a dishwasher cleaner once a month, and inspect the door seals for debris. These steps help maintain efficiency and prolong the dishwasher's life.