Bosch Series 8 CMG656BS1 Installation Instructions
![Bosch Series 8 CMG656BS1 Oven manual cover](/images/OfEdloebALcltOdmnyLWfyZk/thumbs/thumb175x175.webp)
To preheat the Bosch Series 8 CMG656BS1, press the 'On' button, select the desired cooking function, and use the rotary selector to set the temperature. The oven will start to preheat automatically.
If an error code appears on the display, consult the user manual to identify the code. Most errors can be resolved by turning off the oven at the mains, waiting a few seconds, and turning it back on. If the problem persists, contact Bosch customer service.
Use a damp cloth with mild detergent to clean the interior. For tough stains, use the oven's built-in self-cleaning function. Avoid using abrasive cleaners or scouring pads that may damage the interior.
Ensure the oven is properly plugged in and the door is closed completely. Check the circuit breaker to ensure there is power. If the oven still doesn't heat, it might be a faulty heating element, and professional service may be needed.
Yes, you can adjust the cooking time and temperature by pressing the function selector, then using the rotary selector to make adjustments as needed.
Regularly clean the oven's interior and exterior surfaces, check the door seal for damage, and ensure the vents are not blocked. Periodically check that the oven racks and trays are in good condition.
To remove the oven door, open it fully and flip the hinge locks down. Close the door slightly and lift it off the hinges. Clean the door with a non-abrasive cleaner and reinstall by reversing the process.
Yes, the Bosch Series 8 CMG656BS1 allows you to use the grill and microwave functions simultaneously. Select the combination mode and adjust the settings according to your recipe.
First, check if the oven is connected to the power supply. If the light is still not working, the bulb may need replacement. Ensure you use a bulb compatible with the Bosch Series 8 model.
To activate the child lock, press and hold the 'Key' symbol button for a few seconds until the display shows a lock symbol. To deactivate, repeat the process until the lock symbol disappears.