Bosch Series 8 WDU8H549GB Installation Instructions

To start a wash cycle, load your laundry into the drum, add detergent, select the desired program using the control dial, adjust any additional settings, and press the Start/Reload button.
If the washer dryer is not draining, check the pump filter for blockages, ensure the drain hose is not kinked, and inspect the drain pump for obstructions. If issues persist, contact Bosch customer support.
Ensure the washer dryer is level on the floor by adjusting its feet. Avoid overloading the drum and distribute laundry evenly to prevent imbalance.
Regularly clean the detergent drawer, door seal, and pump filter. Run a drum clean cycle monthly, and check hoses for wear and tear.
Error code E18 indicates a drainage issue. Check the pump filter, drain hose, and pump for blockages. Clean as necessary and restart the machine.
Yes, both liquid and powder detergents can be used. Place liquid detergent in the designated compartment and powder detergent in the main wash compartment of the detergent drawer.
Select a drying program after your wash cycle completes. You can use the AutoDry function for automatic drying or set a specific drying time. Load should be appropriate for the chosen drying cycle.
Remove the detergent drawer by pulling it out and pressing the release lever. Rinse it under warm water to remove any residues and dry thoroughly before reinserting.
Use eco-friendly programs, wash full loads, and avoid using high temperature settings unnecessarily. Regular maintenance ensures optimal performance and energy usage.
Unusual noises could be due to an unbalanced load, objects in the drum, or worn-out components. Check the load distribution and inspect the drum for foreign objects.