Bosch Series 4 WNA134U8GB Installation Instructions
![Bosch Series 4 WNA134U8GB Washer Dryer manual cover](/images/sTYxQjGyFvHLdccqBFHaoAwk/thumbs/thumb175x175.webp)
To start a wash cycle, turn the program selector to your desired program. Adjust any additional settings using the control panel, then press the 'Start' button to begin.
Check if the appliance is properly plugged in and the door is closed securely. Ensure the water supply is turned on and the Start button is pressed. If the problem persists, refer to the manual for further troubleshooting.
Remove the detergent drawer by pulling it out and pressing the release lever. Wash it under running water and remove any residue. Reinsert the drawer once it's clean and dry.
Regularly check and clean the lint filter, detergent drawer, and door seal. Inspect the hoses for any signs of wear or leaks and clean the drum with a washing machine cleaner to prevent odors.
Ensure the drain hose is not kinked or blocked. Check and clean the pump filter located at the bottom front of the appliance. If the issue continues, the pump may need servicing.
Yes, you can use the Wash & Dry program, which automatically transitions from washing to drying. Select the program and adjust settings as needed before starting the cycle.
Ensure the washer dryer is level on a firm surface. Avoid overloading the machine and distribute the laundry evenly inside the drum.
Check if the selected drying program matches the load type and size. Ensure the lint filter is clean and not obstructing airflow. Consider extending the drying time if needed.
Use energy-efficient programs and low-temperature settings when possible. Always wash full loads and take advantage of the Eco mode for both washing and drying.
The 'E18' error code signifies a drainage problem. Check the pump filter for blockages and ensure the drain hose is not obstructed. If the error persists, contact Bosch service for assistance.