Bosch Series 6 WNA14490GB Installation Instructions
![Bosch Series 6 WNA14490GB Washer Dryer manual cover](/images/fiABcrvmaiRlGPGFAjZChzIY/thumbs/thumb175x175.webp)
To start a wash cycle, first ensure the appliance is plugged in and the door is closed properly. Select your desired cycle using the control panel, adjust the temperature and spin speed if necessary, then press the 'Start/Pause' button to begin the cycle.
If the washer dryer is not draining, check for blockages in the drain hose or filter. Ensure the hose is not kinked and the filter is clean. If the problem persists, there may be an issue with the pump that requires professional assistance.
Ensure the washer dryer is level by adjusting its feet. Check that the load is balanced and not overloaded. Avoid washing single heavy items that can cause imbalance.
Regularly clean the detergent drawer, door seal, and filter. Check and clean the water inlet screens periodically. Run a maintenance wash using a drum cleaner solution or vinegar to keep the drum fresh and hygienic.
Ensure the door is closed properly and the power supply is connected. Check if the 'Child Lock' feature is activated. Refer to the user manual for specific error codes displayed on the panel.
Yes, the Bosch Series 6 Washer Dryer has a combined wash and dry cycle. Select the appropriate program that includes both washing and drying functions, then start the cycle.
Run a hot wash cycle with a washing machine cleaner or vinegar. Ensure the door is left open after each cycle to allow the drum to dry and prevent mold and mildew buildup. Clean the door seal and detergent drawer regularly.
To use the delay start function, select your desired program and press the 'Delay Start' button. Adjust the delay time using the control panel, then press 'Start/Pause' to activate the delay and begin the cycle at your chosen time.
The 'Eco' mode reduces energy consumption by using lower wash temperatures and longer wash times. This mode is ideal for lightly soiled clothes and helps save on energy bills.
To clean the filter, open the service flap at the bottom of the machine. Place a towel or container under the filter to catch any water. Unscrew the filter cap and remove any debris. Rinse the filter under running water and reassemble it securely.