Bosch Series 2 WAJ28008GB Installation Instructions

To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, select your desired program using the program selector, and press the 'Start/Pause' button.
Check if the machine is plugged in, the door is properly closed, and the 'Start/Pause' button is pressed. Ensure the water supply is turned on. If the problem persists, consult the manual.
To clean the detergent drawer, remove it by pulling it out while pressing the release lever. Rinse it under warm water and use a brush to remove any detergent residue. Dry and reinsert it.
Regularly clean the detergent drawer, drum, and door seal. Check and clean the filter and ensure the machine is level to avoid vibrations. Run a maintenance wash with a drum cleaner every few months.
Ensure the washing machine is level and on a stable surface. Check that the transit bolts have been removed and that the load is balanced inside the drum.
Check the pump filter for blockages and ensure the drain hose is not kinked or clogged. If the issue persists, consult the user manual or contact customer support.
Use lower temperature settings, wash with full loads, and select eco-friendly wash programs. Regular maintenance also helps in efficient energy usage.
Refer to the program chart in the user manual. Select programs based on fabric type, soil level, and desired temperature. Delicate fabrics require gentler cycles, while cottons can handle more robust washing.
The maximum load capacity is 7 kg. Overloading the washing machine can affect its performance and lead to damage.
Ensure the machine is level and on a stable surface. Avoid overloading and make sure clothes are evenly distributed in the drum. Regular maintenance can also reduce noise.