Bosch Series 6 WQG245R9GB Installation Instructions
![Bosch Series 6 WQG245R9GB Dryer manual cover](/images/cSnEnunWUPtilSddBkpbIfHD/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and pull out the lint filter located at the bottom of the door opening. Remove any lint by hand or rinse the filter under warm water. Ensure it is completely dry before reinserting.
Check if the dryer is properly plugged in and the power socket is working. Ensure that the door is fully closed and the start button has been pressed. If the issue persists, check the circuit breaker or consult the user manual for further troubleshooting steps.
Ensure the load is not too large and the items are not too wet before drying. Use higher spin speeds in your washing machine to extract more water. Clean the lint filter and use the appropriate drying program for the fabric type.
Unusual noises could be due to loose items in the drum or objects caught in the filter area. Check for loose coins, buttons, or other items. If the noise persists, it might be due to a mechanical issue, and you should contact Bosch customer support.
Regularly clean the lint filter after each cycle, check and clean the moisture sensor with a damp cloth monthly, and ensure the dryer is level to prevent vibrations. Additionally, inspect the air intake and exhaust vents for obstructions.
The anti-crease feature can be activated by selecting the appropriate program that includes this function. It will intermittently tumble the clothes after the drying cycle to prevent creasing. Refer to the user manual for specific program settings.
If drying times are longer, check if the lint filter and moisture sensor are clean. Ensure the dryer is not overloaded and the exhaust vent is not blocked. Using a higher spin speed in the washing machine can also help reduce drying times.
While the dryer can handle most fabrics, it is important to check the care labels on your garments. Delicate fabrics may require a lower heat setting or air dry program to avoid damage. Use the appropriate program for each fabric type.
To prevent odors, regularly clean the lint filter and moisture sensor. Occasionally run an empty cycle with a cup of white vinegar to clean the drum. Ensure the dryer is well ventilated and avoid leaving damp clothes inside for extended periods.
To reset the dryer, turn it off and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. If the error code persists, refer to the user manual for specific error code troubleshooting or contact Bosch support.