Bosch Series 6 WAU28T64GB Installation Instructions
![Bosch Series 6 WAU28T64GB Washing Machine manual cover](/images/DNuPewFhJfyGEUdayAjbDjDF/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, select the desired wash program using the control dial, choose additional settings if needed, and press the 'Start/Pause' button.
Ensure the machine is plugged in and the door is properly closed. Check the circuit breaker and make sure the water supply is turned on. If the issue persists, refer to the user manual or contact customer service.
To clean the detergent drawer, pull it out gently by pressing the release lever. Rinse it under warm water to remove any detergent residue. Use a soft brush if necessary, and dry it thoroughly before reinserting.
Run an empty hot wash cycle with a drum cleaning detergent or vinegar once a month to prevent limescale and detergent buildup. Leave the door open after each wash to allow the drum to dry and prevent mold.
Ensure the washing machine is level and stable. Adjust the feet if necessary. Avoid overloading the drum and distribute laundry evenly. Excessive vibration can also be caused by an unbalanced load.
Check if there is water remaining in the drum. If so, run a drain cycle. Wait a few minutes after the cycle ends as the door lock mechanism may take time to release. If it still doesn't open, consult the manual or contact support.
Use the Eco setting for energy-efficient washes. Wash with full loads, use cold water settings when possible, and regularly maintain the machine to ensure it runs efficiently.
Yes, the Bosch Series 6 WAU28T64GB has a 'Delay Start' feature. Select the desired program, then press the 'Delay Start' button to set the desired delay time before pressing 'Start/Pause'.
To clean the filter, open the service flap at the bottom front of the machine. Unscrew the filter cap and remove any debris. Rinse the filter under running water, then replace it securely.
Common error codes include E18 (drainage issue), E23 (leakage detected), and E29 (water supply issue). Refer to the user manual for specific troubleshooting steps or contact customer service.